Jump to content

JD50

Members
  • Content Count

    28
  • Joined

  • Last visited

About JD50

  • Rank
    Member

Profile Information

  • Gender
    Male
  • Location
    North Texas
  • Interests
    My Family, Western Action Shooting, Fly Fishing, Camping, Woodworking & Leatherworking

LW Info

  • Leatherwork Specialty
    none yet
  • Interested in learning about
    Making holsters, sheaths, book covers, belts...just about anything that can be made from leather
  • How did you find leatherworker.net?
    surfing the web

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Thank you all. Great info. Bruce, the tutorials are really helpful. JD
  2. I recently picked up several edge bevelers (sizes 1-5) and a French edge skiver at an estate sale. They were all very dull. I have tried unsuccessfully to put an edge on them using small strips of sandpaper wrapped around a finishing nail ground flat on one side. Any help on how to sharpen these things would be appreciated.
  3. Learn how to use and sharpen your tools. Get the book "Leathercraft Tools" by Al Stohlman
  4. You are a master!! I am absolutely fascinated by the buffalo skull. Would like to know more about how you did that.
  5. Frank, Great job. I really enjoy seeing well done period correct gun leather. JD
  6. I just finished a checkbook cover for my wife. I've been having a hard time getting the hang of floral carving but I finally did one that I think is passable. It did make a big difference tooling on Herman Oak leather instead of the cheap stuff that I had been practicing on but I still can't seem to make my backgrounding look even. Critiques are welcome. JD
  7. I guess this is a dumb question but I have to ask... Today I was trimming some sheep wool for applicator pads and I looked down in the trash can and realized that about 80% of the stuff I paid good money for is going right in the trash and is never used. The pack-rat in me took over and I picked it out of the trash and put it in a plastic bag thinking it's got to be good for something. But to save myself from moving it around for years thinking someday I'll need this stuff, I thought I'd ask if anyone can suggest any practical uses for loose sheep wool. JD
  8. Thanks to all who responded. I'll give it a second chance and ask for an exchange. jhinaz, just for the record...when I stated that the blade was VERY dull, I wasn't referring to the modeling spoon blade but to the groover blade. Granted, the spoon should be nice and dull. I currently use a Craftool adjustable groover which was very sharp out of the package and only requires a little stropping to maintain the edge. It does a fine job but I thought the chuck on the Pro groover looked like a time saver when adjusting widths. Also, your suggestion of asking them to inspect the replacement before shipping is a good idea...I'll do that. JD
  9. I just received a Tandy Pro Stitching Groover Set. Right out of the package there are several issues with the tool. The main problem is the small set screw that is supposed to hold the blade in place. Either the allen wrench or the hole in the set screw is rounded off so that I can't tighten the setscrew. Also, the blade and the guide arm seem to be lined up at a rather odd angle to each other (not sure if it's supposed to be like that); the blade is VERY dull and will not even cut a groove; there is a rough spot on the guide arm right where it would rub against the edge of the leather; and there is a small chunk out of the wooden handle. This tool looks like a reject that should have not made it out of the factory! I am not sure whether to return the tool in exchange for another one or just get my money back. If anyone has this tool and would share their experience and opinion I would appreciate it. Up until now, all of my tools have come from Tandy and I don't have any complaint against any of them. JD
  10. Aaron, That IS a good idea...which gives me an idea. I'm thinking a turned wood base with a tooled leather rounder might look nice. Hope you don't if I borrow you idea. JD
  11. Thanks Brother Dwight. The Resolene worked. My vinegaroon is ready so I'll be using that from now on if I want something black. Thanks to all who responded. JD
  12. I don't do much black leather but I decided I wanted a black slim jim holster, belt and cap pouch. I made the cap pouch and dyed it black with Fiebings dye. It turned out great with a smooth finish with no black rubbing off. Then I cut out and tooled my holster. After it dried I lightly oiled it (outside only) with EVOO because it seemed a little too stiff. After the oil dried I dyed it black and after the dye had soaked in I buffed the excess off with sheep wool.. After a couple of days drying I was going to start sewing but when I picked it up I noticed it felt kinda tacky instead of slick and smooth. I started buffing it with sheep wool again and the black just won't stop coming off. It is getting less with more buffing but it still feels tacky. I dyed a belt and cell phone case about a year ago with the same bottle of dye and of course the cap pouch recently and none of the other items have any black rubbing off. I didn't oil any of the other item before I dyed them so I'm wondering if the oil is the cause of my problem. I didn't oil the inside of the holster though and the black is coming off of the inside too. I usually use British Tan or Tan and often lightly oil between tooling and dying and don't have any problem with other colors. Any suggestions as to what happened or what I can do to fix it? I'm in the process of making some vinegaroon now so I won't be using black dye anymore but I need to figure out how to fix this mess! JD
  13. JD50

    Springfield Leather

    I started out buying from the big "T" before I knew about Springfield Leather but most of my business will be going to Springfield now. I just received my second order from them a few days ago and I am very impressed. I placed my order online and the next day a man (sorry I didn't get his name or I'd give him a little publicity here) called me to find out how I wanted my leather cut. He really went out of his way to understand what I was planning to make and what I needed. The best part is when I received my order it was cut exactly the right way! JD
  14. Up until now my experience in leatherworking has been holsters, knife sheathes etc made from veg tan leather so I'm moving into an totally unknown area here. I'm thinking about trying to make a Western style vest and I have lots of questions. Is there a source for patterns for these vests? I would like for it to be made from a very soft leather...what would be a good leather to make it out of? Would I be able to use a standard sewing machine to sew it? If so, are there special needles that need to be used? What type of thread would I use? Hopefully I successfully attached a picture of the type of vest I am interested in making. Thanks for any info. JD
  15. George, I have Dusty Johnson's DVD on holsters. I don't mean to knock it because as a rank newbie I did learn a lot from it and keep going back to it. But now, after making a few holsters I am wanting more info than his video provides. I am wishing that I had put my $30 toward Bianchi's DVD set. Hidecrafter has George Hurst's videos: https://www.hidecrafter.com/hci/index.php?option=com_virtuemart&page=shop.browse&category_id=2&Itemid=35 I would also be interested in hearing comments on Bianchi's DVD's from anyone who has them. JD
×
×
  • Create New...