esantoro Report post Posted July 3, 2007 Can anyone recommend a good large poly cutting board, about 24" by 36" or 48"? Recently, I've started cutting through my 3/8" board that is rather soft. I have one poly cutting board about 18" by 24" that is made for kitchen use, and it's perfect. Nothing I'm using would ever cut through it. So far this is the best I can come up with on the net: http://www.cutting-mats.net/cutting-mats-1022.html Ed Quote Share this post Link to post Share on other sites
bruce johnson Report post Posted July 3, 2007 Ed, Most good sized towns will have a plastics shop. There are some mail order places too. If they don't stock it, they can usually order cutting board overnight. They will cut to size, and may have remnants sitting around. I got two five gallon buckets of scraps that I make my cell phone molds, and stuff like that out of for free. I like HDPE to cut on, and LDPE to pound/punch against. The HDPE can crack if you hit it enough. Bruce Johnson Quote Share this post Link to post Share on other sites
MatthewD Report post Posted July 3, 2007 Ed, I did a fast google search and got this http://www.google.com/search?num=100&hl=en...ard&btnG=Search Quote Share this post Link to post Share on other sites
wolvenstien Report post Posted July 3, 2007 Myself and severla other use this: http://www.createforless.com/products/prod...b8-4ee730823f4d But it isnt for punching holes... just cutting... Use your white poly board for punching holes... Hope this helps... I got mine at walmart, but any sewing/fabric shop would have one I would suppose... Quote Share this post Link to post Share on other sites
MatthewD Report post Posted July 3, 2007 That's the one I have but there are times when I wish it were longer.. Quote Share this post Link to post Share on other sites
M.J. Corlett Report post Posted July 13, 2007 Hi, I was just looking through the forum and saw this. I covered one of my work tables with 3/4 poly board from this site. My table is 3' x 4'. http://thecuttingboardfactory.com/Merchant...egory_Code=3WSA Quote Share this post Link to post Share on other sites
