gregoire

BTW, if anyone has video or books that could help me get this going I would love to buy/borrow/trade anything.

Thank you all. First problem is my bobbin is not threaded properly. It s not properly done in straight layers. I did find a book but it has part numbers and treading sequence by part numbers. might as well be in chinese. I will work on it in the next couple days and take better pictures. Again thank you to all for your help! v/r

I am still working for some help. I am stil unable to make a propers stitch. Anyone in California, Arizona who could help me?

Thank you. i did correct that a few days ago. It is a little better but I still have long loops in the bottom of the leather.

Still no luck! Any help would be great! thank you

all, Thank you for your help here are some pictures, I hope it helps v/r Gregoire

Kate, Thank you! I basically would need all the info I could get. From the set up, making sure I am threading the machine properly, to help adjusting tention to get a proper stitch. I have the machine set up and have tried to stitch some leather but the loops on the bottom are not getting tight and are getting stuck on the bobbin. I will try to take a few picture and attach them to this post. I am thinking of trying to hire someone locally (san Diego) to help me with the initial set up. v/r gregoire

hello, this will be my first post. I just got a Landis 3 and I am looking for any help possible. I have found parts of the manual but they are no help at all. pictures or videos would be great. thank you .