Jump to content
Frankqv

Ferdco 1010

Recommended Posts

This is a Ferco 1010. It is is marked 2000,probably a predecessor to the 441, 2000. It sews excellent. This machine is like New condition,and runs like a new machine.I got it from a fella that had it in storage.

You might say this is a Ferdinand Baby Bull on steroids. where the Baby is 11" compound feed, this is a 16" compound and walking foot,with Reverse.It has servo and speed reducer,table is immaculate. The feed dogs and pressers have been polished.

This machine is the same as the Techsew 180-2,

Here are the

Specifications:

  • Maximum Sewing Thickness: 3/4"
  • Needle Type: 7 x 1 or 794
  • Needle Sizes: 22 to 28
  • Thread Sizes: 138 to 415
  • Presser Foot Clearance: 7/8" (22mm)
  • Sewing Area: 16"
  • Maximum Stitch Length:10 mm
  • Servo Motor: 800W, 1 HP, 110V,

$1700.00 I will Crate it. Buyer pays for shipping.Will ship from Commercial Address,with loading facility. 4571 Clark Rd,Sarasota FL,34233 Shipping size 30"D x 56"W x 56"H wt 225 LB

Frank Vespa

941-350-0599

post-49696-0-34984700-1449095075_thumb.j

post-49696-0-61706200-1449095088_thumb.j

post-49696-0-63361200-1449095098_thumb.j

post-49696-0-25758300-1449095109_thumb.j

post-49696-0-28975800-1449095122_thumb.j

post-49696-0-12322000-1449095143_thumb.j

post-49696-0-55697300-1449095154_thumb.j

post-49696-0-06481600-1449095180_thumb.j

Share this post


Link to post
Share on other sites

A photo of the stitch

post-49696-0-51805400-1449098167_thumb.j

post-49696-0-54512700-1449098174_thumb.j

Share this post


Link to post
Share on other sites

Attached are pictures of edge guide and various stitched pieces 277/277 9 oz veg,split to 2 oz veg,split to split all 270/270

post-49696-0-20596800-1449168550_thumb.j

post-49696-0-29310000-1449168565_thumb.j

post-49696-0-04134300-1449168592_thumb.j

post-49696-0-41956400-1449168611_thumb.j

post-49696-0-89286300-1449168627_thumb.j

Edited by Frankqv

Share this post


Link to post
Share on other sites

Great guy to deal with. I bought a machine from him. It was crated very well and worked as described!

Share this post


Link to post
Share on other sites

Thanks Big Matt,It was pleasure dealing with you.

Share this post


Link to post
Share on other sites

Let me correct one thing,this is a drop feed,walking foot machine.

Share this post


Link to post
Share on other sites

Sold

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×
×
  • Create New...