Jump to content
ericlarson

Diecut Stamp For Steady Cut Outs

Recommended Posts

Hey everyone, I am looking for a supplier that is able to create a custom steel diecut for leather..Basically, apply the steel diecut to the leather and hammer down to cut the shape out.

Does anyone have information about this?

Thank you,

-E

Share this post


Link to post
Share on other sites

there is loads of information on this site about mallet/clicker dies. I have had good experience with Texas custom dies in the past. One thing you might consider is that your die cost will go up $20 to $30 for the added handle compared to a clicker die. I made my first press for around $150 using a 20 ton harbor freight shop press (the press was on sale and I welded my own plates/reinforcements). So if you plan on having numerous dies made, a press might be something worth looking into before you invest your money into mallet dies.

link for press details

http://leatherworker.net/forum/index.php?showtopic=35165

Edited by chrstn53

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...