Butch Report post Posted December 19, 2011 Just curious what type of finish you might be using for belts that are dyed partially black or have letters that are dyed black. I've previously used black leather paint and noticed that it has a tendency to come off or peel. I don't want the dye to bleed out and run into the natural leather. I've also used Saddle LAC and Leather Sheen, but I'd like to know if there is something out there that is better as a finish. Thank you very much, Butch Quote Share this post Link to post Share on other sites
TOM123 Report post Posted December 19, 2011 I use Fiebing's Acrylis Resolene. start with a damp sponge (makeup sponge from the dollar store) and diluted down Resoline, rub it on the belt, watch for unevenness if you do get any use a clean damp sponge to smooth it out again, practice on some scrape first. Quote Share this post Link to post Share on other sites
Mojo66 Report post Posted December 20, 2011 I usually go over the dye with either Resolene or Super Sheen, just "paint" the lettering with it. Never had a problem with the colour coming off. Quote Share this post Link to post Share on other sites
Butch Report post Posted December 21, 2011 Thanks. I'll give that a try Thank you very much, Butch Quote Share this post Link to post Share on other sites
