Jump to content

keableleather

Members
  • Content Count

    34
  • Joined

  • Last visited

About keableleather

  • Rank
    Member
  • Birthday November 13

Contact Methods

  • Website URL
    http://www.keableleather.com.au

Profile Information

  • Gender
    Male
  • Location
    Australia
  • Interests
    Leather work and i love to snow ski,cook and take long tours on my Harley Road King. I love the crack of Dawn and you'll find me bouncing out of bed with a gusto of energy around 4am every day so as not to waste a minute....

LW Info

  • Leatherwork Specialty
    Motorcycle Armor
  • Interested in learning about
    All aspects of leather craft

Recent Profile Visitors

2,448 profile views
  1. End grain pine is a good surface to punch through with your hole punches and will not damage your punch edge, and horses for causes too, i use a hardwood floor board and have glued a piece of 6mm or 1/4" rubber insertion rubber or conveyor belt to it and punch through on this surface, it's great for awl or lacing punches and releases easy. also a block of bees wax is great for awl work as it lubricates with each hole you push through.
  2. What do you guys think about this style? this is done on 3-4oz (1.5mm) veg tanned using the case and carve technique with a swivel knife and then a few basic & homemade stamps for bevel and edging etc and finished by paint and then a polish over with clearcoat. https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xpa1/t31.0-8/s720x720/77795_126989594120421_1622145781_o.jpg https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xfa1/v/t1.0-9/552350_126989690787078_314304736_n.jpg?oh=524dae313ce483e28135874877d1ba11&oe=566D3672&__gda__=1453108172_ba438d45b4428b04646e40034b087d8a https://scontent-lax3-1.xx.fbcdn.net/hphotos-xaf1/v/t1.0-9/s720x720/527346_126989667453747_1993635635_n.jpg?oh=ad80a79003d8908456511db576243c3d&oe=5662965E
  3. Great job and yep that hand stitching is a patient and finger/hand toughening procedure.... i hand stitch my belts and it can be anywhere from 650 stitches per belt but the result is something pretty special i think.
  4. Try this easy to use software, I use transparencies and the copper colour lines and remove or do not use any infill on your shapes, (ie Draft Mode) http://www.sgdesigns.com/designer.php
  5. Theses are GREAT! well done and so inventive and crafty! I too would like to see how you done these! I have a pile of miniature BITS that would be great as the rings between them and the keys! Available here also from Birdsall leather in Australia http://www.birdsall-leather.com.au/AOHB7744w/Ornamental-Horse-Bits/pd.php
  6. Yep i think Tandy are very similar: http://www.tandyleatherfactory.com.au/en-aud/search/searchresults/1249-042.aspx That's link to the product (It's Tandy Australia) but the product number is Item #1249-01 and should be the same for any tandy store worldwide. Also i get a similar type that are BLIND on the back and top... ie they don't have a button head so you can hide the head flat under a second layer or top cover. I get them from a craft sewing chain over here in Australia called Lincraft.
  7. Your a little too humble Double U, this work i can only say is exceptional and your client receiving a product like this is worthy of being the beholder !!!! (ps a $50 tip to me means you need to up your price :-) but it also means they are very appreciative! So Good!!
  8. Here's an interesting article on the Crow & the Raven, interestingly the Raven lives for 30yrs compared to a Crows lifespan of 8 years - http://www.diffen.com/difference/Crow_vs_Raven
  9. Welcome Em....with your background you'll be addicted to working with leather in an instant, let your mind explore the possibilities of also integrating leather with your other mediums, and skills! I also work with metal and make belt buckles as well as motorcycle leather - http://keableleather.com.au/?p=454 Cheers Jace
  10. This is a video from youtube showing how to saddle stitch a belt edge. http://youtu.be/Q2lDExF5NbE
  11. Here's my technique on getting a straight line stitch using an edge grooving tool & the Craftool Over-stitch Wheel System Item #8091-00 from Tandy. This tool comes with 3 wheels that are easy to change over , you get 5,6 & 7 TPI. 1 - Set your grooving tool to the desired distance & cut your groove, do several passes to get the depth you require. 2 - Wet your stitch line, position your over-stitch wheel in the groove & keeping a firm pressure move slowly forward and then back, repeat and progressively move along your groove. 3 - The result is a perfect formed straight stitching groove with even indents to take the awl. 4/5 - Take your awl & here i am using bees was to stab the hole at approx 45 degree to the stitch line.
  12. Nuttish - this is a good video on actually stitching for perfection.. http://youtu.be/Q2lDExF5NbE
  13. Thanks for the makers comment, and yes mate that is an impression from what you called a stitching wheel, usually referred to as an over-stitch wheel and is also used after stitching to pressure down & tidy up your stitching.....if you want to stitch beautifully and quick then stick to the basics and practice and then some more practice. But the easy way to get your lines very straight is to use as (NVLeatherworx) pointed out, use a grooving tool to scribe your line and undercut a nice groove along the edge, this tool guides as straight as the edge of your leather is and makes a perfect groove to the distance you set it from your edge. That's gives you your stitch line, then dampen (case) the leather and use the over-stitch wheel, place it in the groove taking note of where you want to start your first stitch and then just slowly rock back and forth with firm downward pressure, continue to track along your groove at a pace that suits you.... take care and be patient, you need to go over and over until your desired depth is acquired and the result is what you seen in the image i posted, ready for the awl. (practice on some scrap veg tan and if you don't have any than I'll send you some for nothing if you cover the postage) Next it is important to use a sharp awl and angle the point (the diamond shape) at 45 degrees to your stitch line and then just allow the point to slip into each stitch groove depression the wheel has made and ensure you are at 90 degrees to the face of your leather and then push down.....but get yourself a chunk of old conveyor belt rubber or some type of thick stiff rubber to push into, glue it to a bit of timber also another good tip is to use a chunk of bees wax as the backing to stab through the leather and into ...in stead of your fingers....(the bees wax keeps your awl lubricated every stab and makes life real easy) don't ever try to punch/stab an awl through leather into fresh air expecting your fingers/hands to be out of the way!!!! It is so so so much easier and safer to stab into a semi solid backing ... Cheers Jace
  14. Hello Newshoes!.... without an interest to ever make shoes....you have just inspired me to make a pair of those, they look great, natural and they are bound to fit your foot if you mold them to the real thing lol.... any more images of them?, would like to see how you have done the heels and ankle area. You should be pretty proud of those for only a second or third pair.....shoe making is a real art !!
×
×
  • Create New...