Carrieanna1172 Report post Posted January 18, 2015 Help my consew 227 is skipping stitches! Anyone had this problem or know how to fix I have re threaded bobbin, changed threads Changed needle everything can't figure out why it's doing this I just finished a project and it sewed fine As soon as I started again this happened ? Quote Share this post Link to post Share on other sites
broncobuster Report post Posted January 19, 2015 is needle in right way? if youve rethread it is it in right? Quote Share this post Link to post Share on other sites
YinTx Report post Posted January 19, 2015 I seem to be having the same problem with a similar machine, see my post http://leatherworker.net/forum/index.php?showtopic=61016&page=2 with the photo of the blue strap done on a 2700 variant. Is this what you are experiencing? If so, when I figure it out I'll let you know why mine was doing it! YinTx Quote Share this post Link to post Share on other sites
Sunnyside Scott Report post Posted January 19, 2015 Re check your thread path, something may have pulled your thread out of the upper tension discs. Ensure that your bottom thread is under the tension spring, after you draw your bottom thread up through the feed dog as normal, hold your bobbin with one finger and pull on the bottom thread with the other hand. This should seat the bottom thread under the tension spring. Scott Quote Share this post Link to post Share on other sites
Carrieanna1172 Report post Posted January 22, 2015 Thanks for the help I am still not sure how exactly but it is fixed!!! I re threaded again and rethreaded a new bobbin it seemed to be a bit loose and there was something catching the thread in the upper tension and sort of fraying it new thread new bobbin and viola ! Thanks again ! Quote Share this post Link to post Share on other sites
