Jump to content
alpenabbq

Oblong Punched Slots

Recommended Posts

Looking for a tool or method for edging an oblong punched slot in 2 plys of 8-9 oz, I've tried using a machinist deburr tool (Vargus, Noga),

works great on the straight, but tears the leather when going around the radius.

Any help or suggestions would be appreiated

Share this post


Link to post
Share on other sites

There are punches made for that purpose: Oblong punches

Share this post


Link to post
Share on other sites

Barry King makes an edger specifically for especially tight inside curves. It is a bissonet edger with a really tight curve. I use one for edging some punched slots. The bigger the slots the better it works, 3/4-1" in length.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...