Gregspitz Report post Posted November 8, 2014 First clicker dies and the strap it made! http://i1161.photobucket.com/albums/q512/gregspitz/1D052BA7-F193-4A5F-92ED-003A4A554C5F.jpg http://i1161.photobucket.com/albums/q512/gregspitz/872B7EF0-FB59-4A0A-A971-CDD8E008EAC1.jpg Thanks to Tom for the pattern drawing to make the dies( see thread in patterns and templates) Quote Share this post Link to post Share on other sites
zikman Report post Posted February 15, 2015 Can you explain your process a little more? How did you punch the holes? Quote Share this post Link to post Share on other sites
Gregspitz Report post Posted February 15, 2015 The dies just cut out the straps. The other work skiving gluing sewing and punching holes are done separate with sewing machine or hand sewing and hand tools. There are many videos on YouTube making watch straps. (Not my videos) Quote Share this post Link to post Share on other sites
QASWA Report post Posted August 11, 2015 is your clicker is 4 ton or 8 ton ? Quote Share this post Link to post Share on other sites
Gregspitz Report post Posted August 11, 2015 4 ton..the little wonder Quote Share this post Link to post Share on other sites
Gregspitz Report post Posted August 11, 2015 holes punched with a rotary hole puncher..measured out and centered first and marked with an aw usually the holes are 6-7mm apart from the center of the hole.. the holes for me are 2mm diameter Quote Share this post Link to post Share on other sites
stevieboy7 Report post Posted August 15, 2015 any reason you didn't have the hole punches included into the die? Quote Share this post Link to post Share on other sites
JLSleather Report post Posted August 15, 2015 I''m guessin' that many holes punched together would make it very difficult to get teh leather off the punch without deformation / stretching. Quote Share this post Link to post Share on other sites
Gregspitz Report post Posted August 15, 2015 The hole placement changes dependent on the length of strap I make. So unless you are making only 1 length of strap you have to customize the hole placement. Quote Share this post Link to post Share on other sites
