Jump to content
troop

Third Briefcase

Recommended Posts

just finished my third briefcase. it is Wickett and Craig English Bridle in tan.

Tony

tn_gallery_10372_812_614417.jpgtn_gallery_10372_812_454303.jpgtn_gallery_10372_812_1531775.jpgtn_gallery_10372_812_1009214.jpgtn_gallery_10372_812_208581.jpg

Share this post


Link to post
Share on other sites

just finished my third briefcase. it is Wickett and Craig English Bridle in tan.

Tony

Top notch!

thanks for sharing.

Kevin

Share this post


Link to post
Share on other sites

Thanks Phatdaddy!

Tony

Share this post


Link to post
Share on other sites

Gorgeous work Tony! I remember a gunbelt you showed me at the Wickenburg show that was English Bridle. I think you said that you don't use any finish on bridle leather since it already has some waxes and finishes. Am I remembering right? I would imagine you do something on the edges since they're dyed. Also, how are you burnishing the edges?

Paul

Share this post


Link to post
Share on other sites

Gorgeous work Tony! I remember a gunbelt you showed me at the Wickenburg show that was English Bridle. I think you said that you don't use any finish on bridle leather since it already has some waxes and finishes. Am I remembering right? I would imagine you do something on the edges since they're dyed. Also, how are you burnishing the edges?

Paul

thanks Paul, yeah i don't have to put any finish on the english bridle leather. i burnish the edges the same way i do on my veg tanned holsters. wet em, rub em with a glycerin bar then rub with a yellow saddle soap soaked piece of denim. when the edge is dry i dye it then rub on some pariffin wax then buff out with another piece of denim. seems to work pretty good.

Tony

Share this post


Link to post
Share on other sites

very nice.

What size hide do you find you need to be able to make a decent sized bag such as that?

Its something i fancy a go at, but the initial cost of the leather is rather intimidating.

adam

Share this post


Link to post
Share on other sites

Thanks Adam, i buy my leather from Wickett and Craig in full sides. it is expensive but i can get three to four bags from one set of hides. i have to order one side in 4/5 oz and one in 6/7 oz so it takes two sides to make those three to four bags.

Tony

Edited by troop

Share this post


Link to post
Share on other sites

thanks Tony...looks like i'm better start saving!

Share this post


Link to post
Share on other sites

That is a great looking piece. Like Adam, I would like to try this as well, but need to acquire some leather. One question, how is the briddle to work with compared to veg tanned leather? is there any advantage other than not having to put a color and finish on it? Does it wet mold the same?

Share this post


Link to post
Share on other sites

That is a great looking piece. Like Adam, I would like to try this as well, but need to acquire some leather. One question, how is the briddle to work with compared to veg tanned leather? is there any advantage other than not having to put a color and finish on it? Does it wet mold the same?

Thanks Country, the english bridle leather is much more supple than veg tanned, so it is easier to maninpulate. not having to put color or finish on it yourself saves time and assures uniform color fro the drum dying process. as far as wet molding, i don't wet mold it. english bridle does not accept water well and it can darken the leather and make it blotchy. it is so soft anyways that you don't need to wet mold it for briefcases.

Tony

Share this post


Link to post
Share on other sites

Hi Tony,

That is a great bag! Your workmanship is amazing.

I just got some w/c black bridle to make a bag of my own, and am fixated on getting my edges dyed black, but to not have any dye come off on clothes or when edges get wet. (especially on straps). So far, I haven't been successful. Even before putting any dye on, the dye done at tannery rubs off during burnishing. What type of dye are you using, or am I just wanting results that are unattainable?

Share this post


Link to post
Share on other sites

I use fiebings pro oil dyes.... I seal with neutral Kiwi then wyosheen.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...