Jump to content

Jarakoko

Members
  • Content Count

    6
  • Joined

  • Last visited

About Jarakoko

  • Rank
    New Member

Profile Information

  • Location
    United States

Recent Profile Visitors

945 profile views
  1. Howdy!  I realize that your post is a few years old, but I have recently purchased a 1541S and I'm experiencing the same problem. In five years, I have never had to reset the clutch on my LU563, but, after a couple of hours of sewing fine, this machine jammed up. I have taken the hook apart and reassembled it a half dozen times. It ran for a few minutes, then jammed up again. Looking inside, there are two "fingers that hold it in place. No matter what I adjust, they just don't reach enough to hold the hook /basket in place. There isn't a mechanic within two hours of here and I definitely don't want to spend hours in transit and hundreds of dollars, to fix a new machine. I'm waiting for a call from a "mechanic" from the place I bought it, but not feeling too hopeful. Did you resolve your problem?

  2. No one? I'm having someone to look at it on Monday. Keep braking tips of my needles.
  3. I got Juki 1541S couple days a go, it worked fine till yesterday. machine got stuck, as its the feature of the safety clutch but even after unlocking it, it keeps jamming. I called the place I bought the machine from and was advised to take the bobbin casing all out as there might be thread stuck. I had very hard time putting the bobbin back together as it looked the machine is out of time. After getting it all back together it worked for like 10min and it keeps blocking it self and some broken needles happened. I'm having someone to come look at it next week, but I'm supper bummed out about it. What am I doing wrong? is it something this machine is know for?
  4. what machines 17/18 are you talking about? I have just one shot in getting the perfect machine, all help is highly appreciated
  5. 830 is on my list too, love that it can be used as single machine as well. 830-2 comes with table as I know off.
  6. Thank you all for the help, I almost decided for Techsew 5100SE, still thinking about that one or if 4100 would be enough, but I like the flat bed option. I'm only scared it will mark our soles.
  7. Hi all, I have spend many many weeks of research for the perfect machine. We mainly work with 2 layers of 1mm leather and Juki 1541S does the job. but we are looking to add heavier leather shoes, plus rubber sole or thick leather insole in the shoe. I'm eyeing couple of Cowboy machines and Global 9204 double needle. Problem is Global is impossible to get in US. We are looking for single needle and double needle post bed machine, I think that is the best for us. huge plus is roller foot. I attached some pic as of what I'm thinking of doing. I really appreciate any input and recommendation. Jara
×
×
  • Create New...