Jump to content
cowboyedout

Cowboy 3200

Recommended Posts

I have been sewing two layers of 6/7 oz leather no problem . When I sew one layer I look at the top of the work and the bobbin thread is visible from the top . How do I adjust it back to the middle of my work?

Share this post


Link to post
Share on other sites

Try backing off the tension on your top thread.

Share this post


Link to post
Share on other sites

If you're not yet familiar with the machine, you might make a mark on there first - where the tension is set NOW - so that you can put it back. There are markers made for steel (I got some yellow around here somewhere), or some people use a dab of nail polish, etc.

Share this post


Link to post
Share on other sites

I tend to use the pre tensioner before playing with the main tension - just a personal preference

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...