Jump to content

jpless77

Members
  • Content Count

    20
  • Joined

  • Last visited

About jpless77

  • Rank
    Member
  • Birthday 10/05/1977

Profile Information

  • Gender
    Male
  • Location
    Louisiana
  • Interests
    Leather work and family

LW Info

  • Leatherwork Specialty
    Bags, briefcases and belts
  • Interested in learning about
    General leathercrafting

Recent Profile Visitors

1,412 profile views
  1. I'm having a problem with the white tiger thread getting dirty or grayish during stitching. Has anyone experienced this or possibly know how to prevent it? Thanks
  2. Thank you all for the insight. Big help!
  3. It's a left twist #6 cord from Campbell Randall. I think the problem might be I try to run a single length of cord when stitching a belt versus breaking it down into smaller lengths. More thread more problems I guess. How do you break your belt stitching up?
  4. Does anyone have any tricks to keep linen thread from twisting so bad while hand sewing? Thanks in advance.
  5. Thank y'all very much, big help
  6. Thank you all for the responses. What do you mean by "casting". I'm not familiar with the technique.
  7. I'm new to linen thread for hand stitching. Can anyone help me with finishing suggestions? I know I can't clip and melt like nylons or polys so any feedback would help, thanks.
  8. I've recently been making firefighter shields. On test pieces I've been finishing them with lci clear-lac for moisture resistance and hardness. I'm looking for an alternative because I'm naturally concerned with the flammability although Cairns leather fire hats are dipped in pine resin and painted with enamel paints. Am I being overly cautious or should I use tan kote, resolene, etc? Thanks.
  9. I've been practicing with a couple Barry King petal lifters as well as a ck undershot beveler. In Likewise's book they say that a lifter is never an undershot and an undershot is never a lifter, but some schools of thought say the lifters can do both. Either way I'd appreciate any incite or tricks with the use of these tools. The undershot works for the tight inside curves of petals, but the lifters only pinch the cuts and put a dark burnish in the scallop( I understand casing plays on this but that's workable), and they don't seem to lift, but push back the petal exposing raw leather. I hope this makes sense. Thanks in advance for the look.
  10. I'm working on a memo cover and a bible cover with floral carving on the outsides. I'm planning on antiquing the design and was curious about when and if I could burnish the edges. Should I put the piece together, sew, burnish and then antique or can I antique, burnish the edges and then finish with a LAC coat? Thanks in advance.
×
×
  • Create New...