Jump to content
Sign in to follow this  
celticleather

Renovating a leather jacket

Recommended Posts

I've been asked to renovate a 1970s leather jacket that's been lanquishing in a wardrobe for about twenty years. I have no problem with restoring the colour (black), or re-stitching pockets, seams and buttons. What worries me is that the leather has dried out to the point where it 'crackles' like building-gauge plastic sheet, and almost stands up unsupported! It hasn't quite reached the point where it becomes brittle, but it's not far off.

What is the best way to restore some suppleness to the leather? My thoughts are leaning towards leather balm (Lexol or similar), hide food, or possibly some mixture of neatsfoot oil and spirit (which may leave a greasy residue).

If anyone has had experience in this area, I'd be glad to hear from you before I do anything irreversible!

Share this post


Link to post
Share on other sites

use the Lexol product if that don't work for you, hang it back in the closet..

"things just dont last unless one takes care of them on a regulsr basis".

Share this post


Link to post
Share on other sites

Skidmore's Restoration Cream would be the ideal stuff for this, Terry.

Share this post


Link to post
Share on other sites

Terry,

I'd go for the Skidmore's too.

Sit in front of the telly rubbing it in all over with your fingers.

I mean into the jacket, not the TV :rofl:

Badger

Share this post


Link to post
Share on other sites

If looking for Connolly hide food, It is now called Hide Care. I think they had to take away the reference to "food"

Barra

Share this post


Link to post
Share on other sites

When I worked for a prominent museum in the library division, we used Lexol conditioner on the old leather bindings. That was all we were allowed to use. In our case we had to make sure that nothing increased the acidity which causes breakdown. In some cases the bindings were several hundred years old and were in surprisingly good condition while others didn't fare so well.

Share this post


Link to post
Share on other sites

I cracked this one with a bit of experimentation! I gave the jacket four sprayings with Fiebings Leather Care (similar to Lexol, I think), allowing three days between sprayings for the Leather Care to absorb. It eventually absorbed about a half-litre! I then resprayed all over with black oil dye, and another coat of Leather Care.

Two coats of Skidmore's on top, and a good rub-down, and it was like a new jacket! The guy didn't recognise it . . . another happy customer!

Thanks to all for your input!

Terry

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...