Daniel1957

This is the inside roll. The dimensions are 25in wide 19in high and the slot section is 5.5in high. The slots for knives are 2in wide with a 1in spacer between. I used a fairly heavy canvas for this section and then sewed that to a soft upholstery leather with a strap and buckle to roll and buckle it.

Each tube is about 20 inches tall with a diameter of 5.5 inches and inside is a knife roll that holds up to 8 knives

And earlier made a couple of hats. (the pink top hat is for the grand daughter) The baseball cap was made using a lot of tips from Beaverslayers Hat tutorial (except the earflaps - they were put on cause it's cold up here in Canada right now)

Just finished a knife roll for my son the Chef.

Here's an example of how to do it, and get it started http://www.kingsmerecrafts.com/page100.html