Jump to content
Rolling Stone

New member needs identification

Recommended Posts

Hello everyone,

My handle is Rolling Stone, I live just out of Knoxville, Tn. My buddy and I have been making knife handles and putting them on blades from the Knife Factory in Pigeon Forge, Tn. We do mostly small damascus for SASS shooters accessories.I have been sewing the sheaths on an old Singer 29-4. I had the chance to buy a needle and awl machine and did buy it. Now I would like to know more about it. It looks something like the big "C" casting on a Landis #3. There is my problem, the Landis flywheels are at a right angle to the machine and mine are like most treadle machines. Look at the pictures and see if anyone can tell me something about this heavyweight. Thanks for looking.The machine is not stuck, kind of stiff but everything appears to be there. The screw that holds the needle is stripped in the needle rod and I will have to remove it to re-tap the hole. There is a cracked casting that is on the right facing the business side of the machine that holds the stitch length adjusting screw. I think it will repair quickly. Re-adjusting after removing these parts may require more know-how than is present at my shop. Any info you can furnish will surely be appreciated. Holsters and gun belts will be next products.

R S

1 sew mach.jpg

2 sewing machine.jpg

4 sewing mach.jpg

5 sew mach.jpg

post-13250-12635035774_thumb.jpg

post-13250-12635035949_thumb.jpg

post-13250-126350366944_thumb.jpg

post-13250-126350368951_thumb.jpg

Edited by Rolling Stone

Share this post


Link to post
Share on other sites

I don't know what brand machine that is but can tell you it's a single needle chainstitch used in collar making,luggage making.It's alot like a Puritan.

I probably have needles & awls for it.

Share this post


Link to post
Share on other sites

Great! Now to find some info concerning setting up the awls and needles. Do you have any idea about another machine, maybe # for Singer machine I can get info on, that the operation would need to be close enough to get it sewing? Sizes, thread and awl and needles are all outside my expertise. HELP ! Thanks "sewmun" for this info. I will be in touch as soon as I know what I need.

R S

Share this post


Link to post
Share on other sites

Singer never made a big single thread chainstitch like this machine,I'd say look to Puritan for more info.

Bob

Share this post


Link to post
Share on other sites

My reply from Puritan. I have further inquired about what info they have about setting up their machine and haven't heard back. This machine must really be an odd ball.

Dear Mr. Hale:

Thank you for sharing with us the photographs of your very

interesting old machine.

Your machine does not resemble any type manufactured in the

past by Puritan, nor does it resemble any other machine with

which we are familiar.

We can provide basic advice on timing and adjustment of

a needle and awl chainstitch machine, of which type is

Puritan. Some of the procedures we use for adjustment of

our machine can likely be applied to your type.

Additionally, some of our screw threads may be same as in

in your machine. The threads were one of many standards in

effect over 100 years ago when Puritan was founded, but

have become lost to time. We continue to support older

Puritan Machines.

We wish you luck with your machine.

Best Regards,

Drew Papanek

Puritan Industries, Inc.

Share this post


Link to post
Share on other sites

BTT, maybe someone new will see this and know more about it. I have it sewing beautifully now. I would just like to know who made it.

Thanks

Rolling Stone

Share this post


Link to post
Share on other sites

I'm almost certainly wrong about this, but there are aspects of that, like the way the base fits the table, and the shape of the flywheel that are quite reminiscent of an A1. I wonder if it's a Pearson or BUSM machine.

I'm almost certainly wrong about this, but there are aspects of that, like the way the base fits the table, and the shape of the flywheel that are quite reminiscent of an A1. I wonder if it's a Pearson or BUSM machine.

Share this post


Link to post
Share on other sites

Hello, I know this is a very old post, but I know what the stitching machine is. It is an International Wax Thread sewing machine made by the International Harness Machinery Co. It was made in Cincinnati, Oh. The machine is pictured in their machinery sales book from the turn of the last century. I hope this helps!

Ryan

Hello everyone,

My handle is Rolling Stone, I live just out of Knoxville, Tn. My buddy and I have been making knife handles and putting them on blades from the Knife Factory in Pigeon Forge, Tn. We do mostly small damascus for SASS shooters accessories.I have been sewing the sheaths on an old Singer 29-4. I had the chance to buy a needle and awl machine and did buy it. Now I would like to know more about it. It looks something like the big "C" casting on a Landis #3. There is my problem, the Landis flywheels are at a right angle to the machine and mine are like most treadle machines. Look at the pictures and see if anyone can tell me something about this heavyweight. Thanks for looking.The machine is not stuck, kind of stiff but everything appears to be there. The screw that holds the needle is stripped in the needle rod and I will have to remove it to re-tap the hole. There is a cracked casting that is on the right facing the business side of the machine that holds the stitch length adjusting screw. I think it will repair quickly. Re-adjusting after removing these parts may require more know-how than is present at my shop. Any info you can furnish will surely be appreciated. Holsters and gun belts will be next products.

R S

Share this post


Link to post
Share on other sites

Great! Now to find some info concerning setting up the awls and needles. Do you have any idea about another machine, maybe # for Singer machine I can get info on, that the operation would need to be close enough to get it sewing? Sizes, thread and awl and needles are all outside my expertise. HELP ! Thanks "sewmun" for this info. I will be in touch as soon as I know what I need.

R S

Here is a link that might help

http://www.campbell-bosworth.com/catalog/product_info.php/products_id/2211

Share this post


Link to post
Share on other sites

Hello, I know this is a very old post, but I know what the stitching machine is. It is an International Wax Thread sewing machine made by the International Harness Machinery Co. It was made in Cincinnati, Oh. The machine is pictured in their machinery sales book from the turn of the last century. I hope this helps!

Ryan

Hi Ryan, where can I access this book, pictures and anything else about this machine?

Regards,

JesseLee

Share this post


Link to post
Share on other sites

I did have several copies, but have sold them. There are 3 machines listed like the one in the pic. Improved International Wax Thread Sewing Machine, Suit Case Machine and Welt Sewing Machine. I need a closer picture of the of the machine above to see if it is a Harness or Suit Case machine. Thats all the information in the book except that the machine has rotary movement which increases speed, more tension and quality of stitch. You can look up the patten number and it will tell you about the machine. I will help you look and see if I can get you a copy of the book.

Hi Ryan, where can I access this book, pictures and anything else about this machine?

Regards,

JesseLee

Share this post


Link to post
Share on other sites

After looking at the pictures, it is the Harness machine.

Share this post


Link to post
Share on other sites

Thanks Ryano,

I have sold the machine to 19th Century Bootmaker and it now resides in Canada. Thanks for your info and help. JesseLee should have contacted you by now concerning the literature. If something doesn't happen soon, contact me, I have his contact info. Again, I really appreciate you effort.

Rolling Stone

After looking at the pictures, it is the Harness machine.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...