Jump to content
nicker

Wanted: Motorized Leather Splitter Skiver

Recommended Posts

The shop where I've been training at, he has a Landis leather splitter. It's green, fairly small and ran with a motor and belts. I have been looking all over the place for one. I've heard you can pick them up for about $700. I really need something that does the work for me because I have a manual leather splitter but I'm just not strong enough to use it and I've been having lots of trouble with pain in my arms and neck.

So if anyone can help me find one or something similar that would be spectacular!

Also if anyone is looking for a manual one. I bought it from Tandy for about $500 and it's barely used... I"ve probably pulled about 10 pieces of leather through it.

Thanks so much!

Share this post


Link to post
Share on other sites

The Landis handcranks I know of usually sell for $600-750. Once in a while a good complete handcrank will slip through Ebay for a little less. Some guys have motorized the 6" hand cranks. Take off the crank and replace it with a pulley. That is going to be the most economical probably unless you hit the right place at the right time. The old motorized small splitters don't show up much. Unless someone hits a shoe repair closing up, the used machinery guys are about it.

Share this post


Link to post
Share on other sites

ebay item #260381896915 under leather splitters

Share this post


Link to post
Share on other sites

I am a new member to this website and I just saw this post. I have and old Fenda electric splitter that has been uses only about 6 times I think. I guess I should get rid of it and I am curious if you ever found and electric one or not.

The shop where I've been training at, he has a Landis leather splitter. It's green, fairly small and ran with a motor and belts. I have been looking all over the place for one. I've heard you can pick them up for about $700. I really need something that does the work for me because I have a manual leather splitter but I'm just not strong enough to use it and I've been having lots of trouble with pain in my arms and neck.

So if anyone can help me find one or something similar that would be spectacular!

Also if anyone is looking for a manual one. I bought it from Tandy for about $500 and it's barely used... I"ve probably pulled about 10 pieces of leather through it.

Thanks so much!

Share this post


Link to post
Share on other sites

I found a hand crank one. Can you send me a picture of yours? How much do you want for it and where would you be shipping it from?

Thanks!

~Nikki

I am a new member to this website and I just saw this post. I have and old Fenda electric splitter that has been uses only about 6 times I think. I guess I should get rid of it and I am curious if you ever found and electric one or not.

Share this post


Link to post
Share on other sites

I have a few extras if anyone is in need or wants to switch to an electric

USMC Model A 7" Sole splitter -110V on a table...using it in my shop now. 750.00

USMC 28" Summit Splitting Machine Model P 220V...using it every day in shop. 1800.00

Manufacturers Supply Company 12" Splitter 220V on table. I have two of these. 850.00 each

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...