Jump to content
Spinner

A Few New Pieces, Tanks Bibs, Etc.

Recommended Posts

It's been a good while since I last posted work so I thought I'd throw up a few pics. Unfortunately, this is not the full list of projects from the last month as it seems only about 20% of folks send installed pics back for the website. Anyway, here are a couple of the ones that did...

Cheers,

Chris

2006 Honda VTX1300R whaletail tank bib with red buckstitch

post-10543-041727100 1340738514_thumb.jp

2005 VTX1800R whaletail tank bib with black buckstitch

post-10543-045164500 1340738518_thumb.jp

2002 VTX1800R whaletail tank bib with "Brass Ring" memorial & soaring eagle full color tooling

post-10543-009965300 1340738545_thumb.jppost-10543-062657200 1340738540_thumb.jppost-10543-023775400 1340738532_thumb.jp

2005 VTX1800N plain whaletail tank bib (with dash area view)

post-10543-012552400 1340738552_thumb.jppost-10543-070802700 1340738556_thumb.jp

2007 Honda Shadow Phantom Slimline tank bib with skull tooling

post-10543-066043300 1340738561_thumb.jp

This last one was a tank bib I did previously, the USN Navy pin-up. unfortunately the bike is no longer with us, so the client has be deconstruct it and turn it into a vest backpatch and sew it on for him:

post-10543-062802500 1340739178_thumb.jppost-10543-047522500 1340738564_thumb.jp

Share this post


Link to post
Share on other sites

I also had my first request for a full blown Sheridan style carving on a tank bib (minus the flowers). Since I'm still learning the pattern side of it, King's X helped me out with the design and did a great job on the drawings. This was my first real attempt at a full Sheridan tooling project...need some more practice but it came out pretty nice and the client loves it. The black is nice because he wanted it understated from afar but detailed when up close.

The bike is a silver 2005 Honda VTX1800N, hence the name. Enjoy!

Chris

post-10543-097708300 1340739489_thumb.jp

post-10543-064042000 1340739495_thumb.jp

post-10543-022611500 1340739498_thumb.jp

post-10543-036535900 1340739487_thumb.jp

Share this post


Link to post
Share on other sites

Last post, just a few more pics...

This one was a donation for a themed bike that was 'returned' to it's owner (had to sell it) at this year's East Coast Gathering at Bulldog's in VA. Can you guess the theme? (sorry for the darn fuzzy cell phone pic...it's all they had on hand right then)

post-10543-033864300 1340739701_thumb.jp

2006 Shadow Aero 750 with the new "Hula Style" Flarecut tank bib. The client asked for "more curves" and him being from Hawaii the name seemed to fit...

post-10543-016516900 1340739710_thumb.jppost-10543-098855500 1340739728_thumb.jp

Edited by Spinner

Share this post


Link to post
Share on other sites

wow Chris, nice jobs!!!! Cheryl

Share this post


Link to post
Share on other sites

wow Chris, nice jobs!!!! Cheryl

Thanks Cheryl, appreciate it!

Share this post


Link to post
Share on other sites

A few more pics that came in...

05+ VTX1800R whaletail tank bib with gator embossed cowhide overlay with royal blue applique lacing to hide the seams & 12mm chrome spots.

post-10543-066260300 1340759336_thumb.jppost-10543-087374600 1340759337_thumb.jp

2002 VTX1800C Full sett - whaletail tank bib with V-twin Engine & "Evil Twin" colored tooling & chrome spots; rear fender bib with chrome spots, VTX1800 colored tooling & chrome spots and maker plate

and leather wrapped side covers with V-twin engine & "Evil Twin" colored tooling and red round braided edges. There is also a backrest that I added chrome spots to and a VTX logo leather patch but it's not shown.

post-10543-049194500 1340759673_thumb.jppost-10543-063727600 1340759692_thumb.jp

2006 Shadow Aero 750 - whaletail tank bib with chrome spots and leather wrapped side covers with custom storage pockets and V-twin engine conchos

post-10543-096027100 1340759702_thumb.jppost-10543-014484700 1340759706_thumb.jp

2007 VTX1800F - whaletail tank bib with U.S. Army "Senior EOD" badge & lettering. (EOD = Explosive Ordinance Disposal)

post-10543-087304700 1340759707_thumb.jp

Share this post


Link to post
Share on other sites

Nice work!

Share this post


Link to post
Share on other sites

really nice stuff spinner. I especially like the last two, on the first post. the pin up is just amazing. the lacing and color of the one up from that, geeze.

Share this post


Link to post
Share on other sites

It's been a good while since I last posted work so I thought I'd throw up a few pics. Unfortunately, this is not the full list of projects from the last month as it seems only about 20% of folks send installed pics back for the website. Anyway, here are a couple of the ones that did...

Cheers,

Chris

This last one was a tank bib I did previously, the USN Navy pin-up. unfortunately the bike is no longer with us, so the client has be deconstruct it and turn it into a vest backpatch and sew it on for him:

post-10543-062802500 1340739178_thumb.jppost-10543-047522500 1340738564_thumb.jp

Chris,

They all look great! But, since I'm a Navy vet, I really like the pin-up on the anchor! How did you do the coloring on that? I can't enlarge enough to see a lot of fine detail but it looks amazing! Paints, dyes? Airbrush?

Share this post


Link to post
Share on other sites

Thanks everyone!

Chris,

They all look great! But, since I'm a Navy vet, I really like the pin-up on the anchor! How did you do the coloring on that? I can't enlarge enough to see a lot of fine detail but it looks amazing! Paints, dyes? Airbrush?

Thanks Bobby, the answer is yes. ;)

Obviously the black background areas are dyed. Black Pro-Oil Dye.

The pin-up was done with brushes and airbrushes using Golden Fluid acrylics and Golden Airbrush Medium to thin.

Share this post


Link to post
Share on other sites

WOW that's AWESOME work Man!

How do you make your paterns? I'm going to make a tank cover for my bike as soon as I figure what I want to carve on it but I still have no clue how to start.

Also, I have a 2002 Shadow ACE (American Clasic Edition) which was right before the AREO. I totaly love the side covers. How the heck did you do that!

If you send some instruction my way I'd totaly appreciate it!

Boyd

Share this post


Link to post
Share on other sites

great work Spinner!!!!!!!:You_Rock_Emoticon:

Share this post


Link to post
Share on other sites

Need phone number of that USN Navy chick....haha....well done, me not a fan of tank bibs, but this is great leather work, clean and well build!!

Like your wet forming arround tank...

Greetings

James

Share this post


Link to post
Share on other sites

Thanks Mike & James. James, I know what you mean, the original artwork is still hanging in my shop 2 years later. ;)

WOW that's AWESOME work Man!

How do you make your paterns? I'm going to make a tank cover for my bike as soon as I figure what I want to carve on it but I still have no clue how to start.

Also, I have a 2002 Shadow ACE (American Clasic Edition) which was right before the AREO. I totaly love the side covers. How the heck did you do that!

If you send some instruction my way I'd totaly appreciate it!

Boyd

Hey Boyd, Thanks. On the patterns, start with your center line. Fold a piece of posterboard in half and use painter's tape to attach it down the center of the tank. Now you can mark off the brackets, fuel tube, etc. on the top of the tank and cut those out. Reattach the pattern to the tank (still folded in half) so it goes around all the brackets, etc. Put the dash on and trace the outside shape. Mark the rearmost edge of the tank, mark the curve where the top rolls to the rear edge and make notes of the widths all the way up the center line. Now you can take that off the tank and use various tools like french curves to make the bib profile. with it still folded in half design the shape and cut the pattern out, unfold and you have a perfectly symmetrical pattern. The process for the whaletail patterns has a number of additional steps to get them just right but they stay in the 'safe' just like Coca-Cola's recipe. ;)

On the side covers, The ones with the pockets are specific to the '04-current Aero that I can tell so far. No other bike I have checked out, including the ACE and Spirit, VTXs, and a number of Zukis and Yamas have the same "dead space" behind the covers as the Aero does. To make them I had to drill about 30 holes in an Aero cover set and use a rod to do depth findings and figure out the pocket space. Once that was figured out, I made up a pattern for the hole placement and pocket sizes. From there I cut out the opening, attach a leather pocket from behind using contact cement and then drill stitching holes through the pocket & cover to sew it in permanently. With the pocket done, the leather is wet formed around the face. Make a top piece for it and then pull all the leather off to punch the lacing holes. Now the leather is glued onto the cover with Barge on both surfaces, dyed, finished and then the top and face are laced together using a modified "over only" mexican round braid. Make up the flaps, straps and buckle holds, attach with chicago screws (so they can be repaired or replaced if needed) and they're all done! Easy, right? ;) Now, it is possible to wrap any side cover and exclude the pockets. I have done this for a couple of VTXs and they turn out pretty nice as well. Just skip to the leather forming part and proceed from there.

Cheers,

Chris

Edited by Spinner

Share this post


Link to post
Share on other sites

WOW that's AWESOME work Man!

How do you make your paterns? I'm going to make a tank cover for my bike as soon as I figure what I want to carve on it but I still have no clue how to start.

Also, I have a 2002 Shadow ACE (American Clasic Edition) which was right before the AREO. I totaly love the side covers. How the heck did you do that!

If you send some instruction my way I'd totaly appreciate it!

Boyd

Hey Boyd,

I just happened to start working on a set of side covers for a 2007 VTX1800F last night so I took a few pics during the process that you might find some inspiration from. The first is post wet forming the face shells. I take them off to punch the lacing holes and then glue them when I put them back on. the second pic shows one cover with just the face glued on and one cover with the face glued on, the top made & glued on and dyed with Black Pro Oil dye. You can see the two sets of lacing holes waiting for the basket weave. I'll see about snapping a few more pics as I go along.

Chris

2012-08-28220355-1.jpg

2012-08-29003127-1.jpg

Share this post


Link to post
Share on other sites

That's awesome help Chris! Thanks.

You are right about the room inbehind the covers. I checked when I went out to the bike. I never thought about forming the whole thing, I might try that next. First I’m going to try a semi-permanent cover (I’ll take pictures and post a new subject when I’m done). They won’t be anything fancy and I’ll probably use some scrap leather just to see how it turns out.

When you glue the pieces on do you rough up the side covers first or does the glue stick without doing that? I assume you use contact cement in the photo.

I live in the one place in Canada where we can ride all year round so I’ll probably wait until mid to late September before try the tank bra.

Thanks again and you’ll hear more from me.

Boyd

Share this post


Link to post
Share on other sites

That's awesome help Chris! Thanks.

You are right about the room inbehind the covers. I checked when I went out to the bike. I never thought about forming the whole thing, I might try that next. First I'm going to try a semi-permanent cover (I'll take pictures and post a new subject when I'm done). They won't be anything fancy and I'll probably use some scrap leather just to see how it turns out.

When you glue the pieces on do you rough up the side covers first or does the glue stick without doing that? I assume you use contact cement in the photo.

I live in the one place in Canada where we can ride all year round so I'll probably wait until mid to late September before try the tank bra.

Thanks again and you'll hear more from me.

Boyd

Not a problem, I don't enjoy making them enough to guard the secrets! ;) Bibs are a different story, love doing those.

I do use Barge Contact cement on both surfaces for the gluing. Rough up isn't really necessary but it helps. I found that just cleaning the plastics with denatured alcohol takes enough of the gloss out of the clear coat to get good adhesion.

The original set of these is still one the road and looking good 3 years and rolling. (They were the only tan set I've done as well, coincidence?)

Here's another tip...when you go to 'contact' the two glued pieces together, lightly wet the leather first. This will help as you're lining everything up, sometimes you need to stretch it just 1/8" more and it will give you a few extra seconds of smoothing time if a wrinkle appears...also, rig a vice or something to hold the cover so you have both hands to align the pieces. Last tip: to make the top pieces, glue the face on and then lay a piece of tracing film over the top. Then yuo simply trace the outline of the remaining uncovered top area and transfer that to leather.

have fun!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...