leatherisfun

Longmont, CO

Scharf-fix 2000 used twice in pristine condition. There is also 5 extra packs of razor blades included. Price is $290 plus shipping

All sold.

Thanks Ken. I think that Mike lost sight of the extras included.

Vergez Blanchard round knife: $50 A pair of Vergez Blanchard L'Indispensable Brass Knives with extra blade: $25 each Vergez Blanchard skiver: $40

They are $1610 at the Keystone sewing site. Mine is just over a year old, it isn't a worn out older machine. I have installed a speed reducer and drop down guide.

Price reduced to $2300. Can't edit original.

A pair of GoldstarTool snap presses for sale. This press also does rivets. With these you can get it right every time, no more using a hammer and hoping for the best. I also have two sets of dies for snaps, #20 and #24. Additional dies can be purchased directly from goldstarttool: http://goldstartool.com/home.php These are normally priced at $60 each. $45 each for the presses Both dies for $30

Juki 1541S with speed reducer and drop down edge guide. Sews up to #138 thread and about 6 layers of 5 oz leather. I'm including left and right zipper feet; binder foot; 1/8, 3/16, 1/4 edge guide feet; 25 bobbins; 15 #18 needles, 100 #20 needles, 13 #22 needles, 49 #23 needles; several cones of thread, #69 and #92. Selling for $1450 I'm located in Longmont, CO. Local pickup or shipping at your cost.

Thanks

Another 441 clone similar to the Cobra 4, Cowboy 4500. Uses the same 794 needle. It has a smooth needle plate and feed dog. 550 Watt servo motor and speed reducer to go really slow. Has a removable table for doing flat work Glue pot included along with the feet pictured, extra bobbins, 6 cones of #207 thread, 4 cones of #138 thread. I added two lines of LED's to have more light. Owned it for a little over a year, selling for $2500. Paypal accepted. Located in Longmont, CO. It can be picked up or shipped with you paying the freight. Call or text 720-201-7991 kirk

French plough guage, brass, 15 cm or 5.9 inches. There is a small crack above the blade which doesn't affect the handle or operation. $275 plus $14 shipping 4" Antique draw guage, brass handle with trigger. Bundled with Leather Wranglers blade. $120 plus $7 shipping Cowboy 6" Deluxe Leather skiver/splitter. Bought new less than 6 months ago, only used a few times. $320 plus $20 shipping

Combination burnisher and sander. This is a two speed motor, with max 1400 rpm at high speed which makes it perfect for efficient burnishing. I made the burnisher myself from a block of Purpleheart wood I brought back from South America. Moving overseas and changing direction, so selling my equipment. Including the 3 extra sanding sleeves, all 220 grit. Asking $120