Jump to content

SteveBrambley

Members
  • Content Count

    261
  • Joined

  • Last visited

About SteveBrambley

  • Rank
    Member

Profile Information

  • Gender
    Male
  • Location
    Devon, UK

LW Info

  • Leatherwork Specialty
    Leather bag making
  • Interested in learning about
    All leather working
  • How did you find leatherworker.net?
    Member of needlebar

Recent Profile Visitors

6,744 profile views
  1. Hi Sandy I agree, I wouldn't have thought that particular machine would have been heavy enough to stitch through sole leather, either. However, the German machinery dealer who was selling that particular example quoted that it was " for stitching soles to shoes". Maybe light weight ladies shoes perhaps, but nothing too heavy. Although, like Singer, Pfaff made many different versions of the same basic machine which differered greatly in their stitching abilities, so anything's possible. Steve
  2. Steve, Sparks again. You can read more about the Bird's iron plantation at the National Park website...the place is now a national historic site.

    http://www.nps.gov/hofu/siteindex.htm

    Sparks

  3. Steve,

    I was reading your comments on sewing machines at leatherworker.net and noticed you are from Devon UK. I have relatives believed to be from there...long time ago. The surname was Bird. William Bird and his son Mark had an iron plantation in SE Pennsylvania in the mid 1700s. Is Bird still a common surname there?

    Sparks

  4. Hi Ray, So you know Hartley, quite a character huh? A really nice guy. We bought our first Singer corner stitcher from him some years back, I travelled up to Walsall to collect it. His shop's quite unbelievable, an absolute Aladdins Cave! Steve
  5. Thanks for posting all the old BU catalogues, I am always interested in the many different items of machinery they once produced. I don't suppose that you have ever come across any info on the BUSM 'Pilot' harness stitcher by any chance? I think this machine (see pic) is a lot later than those in your photos. Steve
  6. I do think that you would be better off with reverse, if you can get it, reverse makes life that little bit easier. I can't comment on the Consew 225 or 290, however, I do use a Consew 206RB-1, which is also similar to the compound feed, alternating presser versions of the Singer 111 and 211. These are very good machines, but still not quite as well built as the Singers. The main advantage of the Consew 206 is that it has the larger capacity bobbin, I suspect that this is true of the 225 and 290, although, as I say, I have no experience of these two machines. The Singer 111 and 211 are, mechanically, very similar and have a number of common parts. Steve
  7. Hi, We have a 211G166, 211G266 and a 211G256, which are all pretty similar and all have compound feed with alternating presser feet and reverse feed. They can just about handle a couple of layers of 7 or 8oz leather, although I wouldn't make a habit of using them for this. Singer recommended them for automotive work (upholstery) tents, awnings, leather coats, work gloves and similar articles so they are quite versatile. Parts are relatively cheap and plentiful. We have a 211G157 about somewhere, but this has only compound feed without the alternating pressers and less clearance, therefore I don't use it much. We also have a 211G146 which has only drop feed and a ball bearing roller presser. This is fine for shoes gloves, handbags and other medium weight leather goods, but no good for heavier stuff like motorcycle bags. Singer also produced versions of the 211G with underbed trimimming (211G457, 211G665, 211G666 etc.). Among the versions that came with large capacity bobbins were the 211G357 (similar to the 157), 211G358, 211G466 (similar to the 266). In my experience, all the 211G class of machines are very robust and will take a lot of abuse without falling apart, they were all made at Singers factory in Karlsruhe, Germany and are a lot better than the later 211U class that were made in Utsunomiga, Japan. Steve
  8. Hi, I use a Singer 45Ksv100 corner stitcher to 'box stitch' the blocked ends into gunslips quite successfully. However, they are quite difficult machines to use and do take a lot of practice. Here's an example below. Steve
  9. Hi Frida. You're welcome! If you have a problem with 3-phase, then there are 'Phase Converters' available that will allow you to run 3-phase machines from a single phase supply. However, this would, obviously, add to the initial cost of the machine. Most of our machines, here, have single phase motors. However, we do have several that need 3-phase, I run these using a 1/2 to 8hp static, phase converter. Steve
  10. That's a standard, multi-purpose presser foot that is fitted to most alternating foot, compound feed machines. It looks like the smaller, right hand 'toe' has been ground off, to enable the guide to be closer to the work. I use this type of presser on most of my leather work, although there are better, made for the purpose, leather pressers available. Steve
  11. Hi, The Pfaff 335 should be ideal for making handbags, it has an alternating presser, compound feed system which is perfect for leather work. I am not a Pfaff expert by any means, but, from the photo, it looks like it is fitted with a synchro binder system, which would also be useful for handbags. It also seems to be fitted with a stitch positioning and control motor, possibly an EfKa system, this would also be a of great help as it works in a similar way to a servo motor and can give very slow speed control. The only problem you might find is that the machine appears to run off of a 3-phase power system. Most machines, here in the UK, run from a single-phase system. Generally, only the larger factories use 3-phase, if you have access to a 3-phase supply, no problem. The Singer 132K is a heavy weight machine and wouldn't really be suitable for handbags. However, they are very good for closing leather hold-alls and similar larger bags. I'm sorry, I can't help you with the Pfaff 141 though. Steve
  12. I'm not sure, but if it is anything like the 133K10 it's for darning sacks, tents, sheets etc. Steve
  13. Hi, It takes a 214x2 NRTW needle, which is the same for quite a few Adler 205, 204, 105 and 104 sub classes and most of the Singer 45K sub classes. I have a manual for a Adler 205/204-64, if that is of any help? Steve
×
×
  • Create New...