Jump to content
Laplanderbags

Leather For A Welding Apron

Recommended Posts

I've been looking to source leather for a couple of welding aprons. I've seen several welding jackets and bibs that are made of "side split cowhide". Is this leather called by another name, is it oil tan, chrome tan or other? Is there another type of leather that would work equally well? The main requirement would be that it will not catch fire. I would really appreciate any help.

Share this post


Link to post
Share on other sites

Call Kevin at Springfield Leather and tell him what you are making. I think you'll probably end up with some chrome-tan under the name Chap Leather.

Share this post


Link to post
Share on other sites

Utility wear such as hay apron, shoeing chaps, and welding aprons are often made from chrome tanned leather splits. One of the most often used leathers is pearl apron splits, sometimes called mulehide but is in fact cowhide. One other leather of note to use in welding clothing is top grain pig skin, it can be had in a lighter weight than some of the other products making it cooler to wear. I would stay away from heavy chap leathers and oil tans because of their weight mostly. You can get these products from Springfield, Siegel, or most any good supplier. I hope I have been of some help.......

Share this post


Link to post
Share on other sites

Weight will depend on the type of welding/activity being done. It will also need to be flexible. When doing overhead welding with stick you want a heavy leather between you, and the splatter/slag that will be coming down on you. My Tillman jacket is fairly heavy, and it has saved me from several burns over the years.

Share this post


Link to post
Share on other sites

I made an apron for a blacksmith recently and used a heavyweight chrome chap leather. His biggest 'hate' about the aprons he could buy off the shelf were that they were stapled together. I ended up 'sewing' with brass wire to hold the pieces together. He says it's working fine for him.

Gary

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...