Camoga 16 inch leather splitter

[oldcowpoke]

For sale a Camoga 16 inch leather splitter this machine has at the most 5 hours on it total it is a CN403 this came out of Canada and is in my shop if you like we can email you more pic of the machine we service any and all splitting machines as well carry a full line of parts blades stones etc, and we travel to your place or your machine can be shipped to us

$7400 obo, per Jack's later post. -- Art

Jack

423-571-1364

email oldcowpoke@charter.net

[Art]

Jack,

Please post prices, and what ever happened to the three cyclones you said you had and the pictures and prices for them.

Art

For sale a Camoga 16 inch leather splitter this machine has at the most 5 hours on it total it is a CN403 this came out of Canada and is in my shop if you like we can email you more pic of the machine we service any and all splitting machines as well carry a full line of parts blades stones etc, and we travel to your place or your machine can be shipped to us

Jack

423-571-1364

email oldcowpoke@charter.net

[oldcowpoke]

pic.. for you of the Cyclone stitchers

Sorry I have tried to find a tab to correct the Camoga editing (to add a price of $7400. obo. to the Camoga with no luck unless I'M looking over it can some one tell me were to find it.

Thanks for your help.

[Art]

Hi Jack,

Edit is down at the bottom of your post, but it only works for a day, then a mod has to do it.

Art

pic.. for you of the Cyclone stitchers

Sorry I have tried to find a tab to correct the Camoga editing (to add a price of $7400. obo. to the Camoga with no luck unless I'M looking over it can some one tell me were to find it.

Thanks for your help.

[LeatherCaptain]

Hi Jack,

I'm interested. Give me a call and maybe we can talk about it and the 3 Tippmann Boss's that you were going to sell me but won't return my phone calls for the past month. Nice to see you're still alive!

Seems like if you're looking to get ripped off...deal with this guy. He's a winner!

[oldcowpoke]

Hi Jack,

I'm interested. Give me a call and maybe we can talk about it and the 3 Tippmann Boss's that you were going to sell me but won't return my phone calls for the past month. Nice to see you're still alive!

Seems like if you're looking to get ripped off...deal with this guy. He's a winner!

Hi hope your doing good I didn't return your calls because I didn't wont to sell you a tippman boss there nothing but junk in my book, I sat both up and out of the 2 I have not one will sew right and not skip stitches sorry you feel that way and hope you have a good day.

[Bob]

LMAO.......

[oldcowpoke]

Hi Jack,

I'm interested. Give me a call and maybe we can talk about it and the 3 Tippmann Boss's that you were going to sell me but won't return my phone calls for the past month. Nice to see you're still alive!

Seems like if you're looking to get ripped off...deal with this guy. He's a winner!

And after seeing some other rude remarks you have made to others on this site it doesn't supperize me. Now go stick your nose in the corner and don't move until I tell you to.

[LeatherCaptain]

And after seeing some other rude remarks you have made to others on this site it doesn't supperize me.[/size] Now go stick your nose in the corner and don't move until I tell you to.

Here's the deal. You quoted me a price on some machines and then never made good on it. I tried calling you for weeks and you never returned my call. You said two of the three machines were working and yet never had the spine to get on the phone and call me back. Why is that? I'll tell you why that is...because, I caught you in a lie, Jack. You said you'd sell me the Tippmanns for $300 bucks each thinking you'd sway me into buying one of your Chinese knockoffs. But, you weren't prepared to sell them to me for $300, were you? So, either you don't have them or you realized their worth more than that and you're going to loose out. So, which is it?

I've got nothing to be ashamed of here, Jack. I'm a straight shooter. You may not like what I have to say but, atleast I'm honest. You're not a man of your word and I don't think anyone wants to deal with a guy like that. Funny how I'm not the only one who feels this way. Maybe we should get John's opinion about your honest business practices.

http://www.jclleathermachinery.com/prod03.htm

I'm sure there's a good story behind this one. Why don't you tell it to us? It'll give you another chance to plug some broken down machine that you'll never sell.

Edited July 14, 2009 by LeatherCaptain

[Kevinjohnson]

I have dealt w/ Jack on two seperate occasions and have been satisfied. I bought a Campbell from Jack and I recieved the same machine which he sent pictures of. There was no bait and switch, just a solid, used machine for half the price of what a rebuilt one would of cost. My check was not cashed until the machine was shipped. Jack also fowarded an updated manual for the Campbell (Connie Nagel did an EXCELLENT job on this manual) and gave me a very good lead on a freight company that has saved me a considerable amount of money (David Kim, Echo Global Logistics). The only problem that I had was that Jack sent me the wrong size needles and awls which was probably due to Jack not being able to read the tiny numbers on the shafts. I would not be afraid to buy anouther piece of machinery from Jack. Kevin Johnson Canyon,Tx 806.670.3739

Send me some smaller needles and awls Jack!

Edited July 14, 2009 by Kevinjohnson

[oldcowpoke]

Here's the deal. You quoted me a price on some machines and then never made good on it. I tried calling you for weeks and you never returned my call. You said two of the three machines were working and yet never had the spine to get on the phone and call me back. Why is that? I'll tell you why that is...because, I caught you in a lie, Jack. You said you'd se ll me the Tippmanns for $300 bucks each thinking you'd sway me into buying one of your Chinese knockoffs. But, you weren't prepared to s ell them to me for $300, were you? So, either you don't have them or you realized their worth more than that and you're going to loose out. So, which is it?

I've got nothing to be ashamed of here, Jack. I'm a straight shooter. You may not like what I have to say but, atleast I'm honest. You're not a man of your word and I don't think anyone wants to deal with a guy like that. Funny how I'm not t he only one who feels this way. Maybe we should get John's opinion about your honest business practices.

http://www.jclle athermachinery.com/prod03.htm://http://www.jclle ath....com/prod03.htm

I'm sur e there's a good story behind this one. Why don't you tell it to us? It'll give you another chance to plug some broken down ma chine that you'll never sell.

God you remind me of all 4 of my x-wives in the same room at one time If you wont a TIPPMAN so bad why don't you just call tippman and buy one and that you even wont a tippman that tells me you don't have a clue that's a tinker toy that's what you make Barrie cloths on NOT LEATHER they sell them to folks that's knows nothing you will need a real sewing machine, so now don't quit your day job you can save up your money and buy you a hand crank sewing machine and if your a good boy mom might pitch in with a little extra $$ and then you can buy you one of them new WINDUP TIPPMAN'S that sews 6 stitches at a time WOW wont you be a HAPPY boy then No I didn't think so. and get back in your corner I didn't tell you could come out. never seen someone get so mad because I wouldn't sell them something maybe I should run for office got to get back to work

[LeatherCaptain]

And folks, this is why I replied to this thread in the first place. To give everyone a good taste of what you get when you deal with Jack.

Good stuff.

[CitizenKate]

Here's the deal. You quoted me a price on some machines and then never made good on it. I tried calling you for weeks and you never returned my call. You said two of the three machines were working and yet never had the spine to get on the phone and call me back. Why is that? I'll tell you why that is...because, I caught you in a lie, Jack. You said you'd sell me the Tippmanns for $300 bucks each thinking you'd sway me into buying one of your Chinese knockoffs. But, you weren't prepared to sell them to me for $300, were you? So, either you don't have them or you realized their worth more than that and you're going to loose out. So, which is it?

Just speaking as a regular by-stander, here (not as a moderator)...

So he decided not to sell you the machine, for whatever reason? So what? He has that choice. It probably would have been a courteous thing to explain that he changed his mind, and why. But there is no rule that says he can't change his mind for any reason that suites him, as long as he didn't take your money for the deal. So you're out of what you thought was a sweet deal. Happens every day. Get over it and move on.

Just my own personal dos centavos.

Kate