-
Content Count
308 -
Joined
-
Last visited
About sheathmaker
-
Rank
Member
- Birthday 04/17/1933
Contact Methods
-
Website URL
pjdkl433@gmail.com. (email) 830 367 5536
Profile Information
-
Gender
Male
-
Location
108 Briarwood Lane W---Kerrville, TX 78028
-
Interests
custom leather work specializing in custom knife sheaths
LW Info
-
Leatherwork Specialty
Custom knife Sheaths and general custom leather work
Recent Profile Visitors
20,753 profile views
-
sheathmaker started following Heart of Texas Leather Show, custom knife sheath, Crystal Rivets in Thick Leather and and 7 others
-
give me a call. 830 367 5536
-
fredk provided the best solution to your problem. The two ply thicknesses will be even stronger and longer wearing than any single thickness collar or belt with the added benefit of the turned back prongs being hidden between the layers. 3/4 OZ. top with 3/4OZ top with 3/4OZ bottom should be about right, and would approximate your original 8/9 OZ plan.
-
If that is a Robert Beard Pro Series swivel knife then it most certainly will live up to the hype. I have used two of his for many years and I could not ask for better. His swivel knife blades are the best also, in my opinion.
-
An electric hair dryer works wonders for hardening leather. I have had one plugged in on my work bench for years. Used mostly for speedier drying but it will harden leather too.
-
I have no scientific proof.....but an old very experienced saddle maker (Don Atkinson) once told me "use ONLY pure Neatsfoot Oil. Neatsfoot Compound contains petroleum distillates which are not good for leather." He also used Virgin Olive Oil from time to time. I say again I have no scientific proof, but 99.99% of what he told and shared with me turned out to be true, so I going to continue using just pure Neatsfoot Oil only, along with some other top dressing products like Tan-Kote and Wyosheen
-
@fredk, Tippman Boss was my very first machine many years ago (When they were still cast iron), in fact mine was serial #0003. Mine was a great little machine and i guess they srtill are. The only problem I ever had with mine is what I call "short stroke". When sewing be very sure you take the handle ALL the way up and ALL the way down each and every stitch so the thread pick up and bobbin cycle is complete. Otherwise missed stitches, bird's nests general frustration, etc. Good Luck and enjoy your Boss!
-
Yes, they are still available. 830 367 5536 if you want to discuss.
-
Scott, i use 207 thread through a 24 needle or you can go a little heavier with 277 through a 25 needle. I go both top and bottom with each.
-
Heart of Texas Leather Show
sheathmaker replied to YinTx's topic in Special Events, Contests and Classes
I got some second hand information that Bob is having some pretty serious health issues. Sometime back, Bob beat cancer back in to remission but the word i got is it is back (lymphoma). Along with me a few prayers would be in order. -
it resembles oil tanned latigo.
-
one word, INLAY. Probably best on a knife sheath
-
Rossr, you have a good start. From this point you need to make some different styles like the drop loop style for bowie style knives with a single or double guard. You apparently have the "Basic Pouch Sheath" DVD and as such the sheaths you show all look pretty much the same and that is because the knives you have covered are all pretty much the same. Design your sheaths with the blade shape in mind and do some more with inlays or overlays in mind. I don't keep or sell the DVDs you mentioned, but there are three more other than the Basic Pouch DVD and they will guide you to make nearly any style sheath you need. They are available from Chris Crawford Knives. I am also available to help you via phone any time 830 367 5536) or email pfl@cebridge.net free of charge. The work you have shown is good and will only get better and better with continued practice.
-
Excellent advice here on the rubber finger covers. Also any fleece bearing leather is much more difficult to sew, by machine or hand. the fleece seems to "catch" the needle (and thread) often.