-
Content Count
1,864 -
Joined
-
Last visited
About billybopp
-
Rank
Leatherworker.net Regular
- Birthday 07/06/1964
Profile Information
-
Gender
Male
-
Location
Pennsylvania, USA
LW Info
-
Leatherwork Specialty
Strap goods, cases, etc.
-
Interested in learning about
There is always more to learn.
-
How did you find leatherworker.net?
Recommendation
-
spring flowers and good food
billybopp replied to chuck123wapati's topic in All About Us and Off Topic
As it turned out, we didn't get to see much. I was able to see up to about 1/3 coverage when heavy clouds rolled in ... and just about the time it was all over they rolled out. I don't mind so much for myself as I've seen several eclipses in the past, but my partner has never seen one, and now still hasn't. - Bill -
spring flowers and good food
billybopp replied to chuck123wapati's topic in All About Us and Off Topic
We're expecting about 90% here in Philly. Skies are clear. Couldn't find eclipse glasses anywhere, so I'll use a sextant to view. I also put together an eclipse kit ..... -
I'm lucky to be a pretty fair musician, but I've never been able to get my hands to move the right way to play stringed instruments ... Other than the ol' 88 string. - Bill
- 176 replies
-
- diy sewing table
- industrial sewing table
-
(and 3 more)
Tagged with:
-
I don't know what it is, but the dog clearly has a guilty smile. Just sayin'. - Bill
-
That looks nice! If you're doing a full length belt, consider turning it by 90 degrees so that the rest of the belt can hang out front to back and not interfere with movement of the laser tracks at the side. Also, consider putting a small index mark at the very edge of the belt, and one on your jig to help alignment as you move on to the next segment of the pattern. If the index on the belt is small enough, you can probably remove it as you bevel the edges. As for, using the laser in place of a swivel knife, it might work but unless you can adjust power to change depth of cut on the fly you will not get some of the finer control of trailing off lines that you'd have with a swivel knife. Even if you CAN control that depth it's likely a lot of work to get the software to do what you want. That's probably worthwhile if you intend to make a lot of the same belts, but likely not worthwhile if you're making just a few. Just my thoughts - Bill
-
Congratulations! To the great suggestions above, I'd add a small inspection mirror, a small flashlight, a nut driver set (Klein tools has a great new set with hollow shafts for longer screws), a little organizer box with common sizes of small screws, C and E clips (they have a way of flying away from you to God knows where when you remove them), some spring hooks, and for hex wrenches get the ball end ones, they're great! I'd add some slip stones to your abrasives. Consider a backpack tool bag to carry tools around, it'll spread the weight over both shoulders (your back will eventually thank you!). Over time, you'll figure out what you use most and should carry around, and what is useful but better left in the workshop. - Bill
-
I had a skinny leather tie in the 80s and loved it! It's probably still around here somewhere. - Bill
-
I totally get it with doing your best possible work, but consider that you do sometimes need to work to a price point. It's the same with just about everything on the market today. VERY few people have an unlimited budget, but some are much bigger than others. You don't want your less expensive products to taint people's opinion of your more expensive ones. One way to do that? Branding! Release less expensive, plainer, perhaps even less durable products under one brand, and then higher end more expensive products under another brand name. It happens in the business world all the time ... Sometimes everybody knows about it such as GM with Chevy, Buick, Cadillac, etc ... Other times, brands that you buy every day are owned by the same parent company but few people know it!! Just a thought - Bill
-
When I started doing leather stuff, I bought some Tandy kits. It was good to get a feel for how to put things together. Since then, I've bought others but the first thing I do with them is to make a pattern from them! I put the kit together to learn where the "sticking points" are in assembly and other details, and also use them to try out my first thoughts on decorating and colors. They generally come out OK, but what follows is usually much nicer when I use the templates to cut out my own version, use proper chisels to make sewing holes, and any other changes! The kits they sell tend to be attractive, nicely proportioned, solid designs that are then buggered up with huge stitching holes, the simplest possible way to attach hardware, etc. There are a lot of relatively simple improvements to be made by anybody with some experience under their belt. - Bill
-
Keep the handle, maybe! - Bill
-
Has anyone used transparent/translucent leather?
billybopp replied to SUP's topic in Leatherwork Conversation
I was tempted to order a sample, but shipping is $10! -
... I see what you did there! LOL - Bill
-
Roller diameters do differ some, but there are limitations on how big machines will take. -Bill
-
That's definitely Dan Akroyd, but that must have been edited in by somebody. He would have been around 10 years old when that episode came out, and there also wouldn't have been a cassette player at the time. - Bill