Jump to content
identiti66

Uk Howdy..

Recommended Posts

Hi all.. although I do a bit of basic leatherwork my main reason for joining was to ask a question.

However.. now I'm here, it could be a good time to start to progress my work a bit. I have swivel knives and needles/thread but haven't invested the time to learn carving or sewing yet.

So far I've made leads and collars for my own and a few friends dogs. Mostly functional stuff for hunters running dogs. My tools have been whatever I could get cheap, I've had a couple of knives made for me too (notably a cutting knife (thought I prefer razor blades) and a skiving knife).

This is a lurcher 'set' that I made specially for someone..

post-34366-097991300 1345986481_thumb.jp

Struggling with upload sizes, got lots more pics and will share when I have more time to fiddle with my images.

Share this post


Link to post
Share on other sites

Welcome to the site. Why not combine the knife and razor blades in the form of a good knife . Asking questions is a good thing getting good answers is a better thing . I like your work and see you have good taste . You are asking yourself now how does he know that ? First you chose a thick leather for this project that says you care next thats some better than average hardware on your project and that tells be you arent going to settle for okay or getting by . So from that I conclude your work and its quality matter to you greatly . My compliments ! Look forward to seeing more

Hi all.. although I do a bit of basic leatherwork my main reason for joining was to ask a question.

However.. now I'm here, it could be a good time to start to progress my work a bit. I have swivel knives and needles/thread but haven't invested the time to learn carving or sewing yet.

So far I've made leads and collars for my own and a few friends dogs. Mostly functional stuff for hunters running dogs. My tools have been whatever I could get cheap, I've had a couple of knives made for me too (notably a cutting knife (thought I prefer razor blades) and a skiving knife).

This is a lurcher 'set' that I made specially for someone..

post-34366-097991300 1345986481_thumb.jp

Struggling with upload sizes, got lots more pics and will share when I have more time to fiddle with my images.

Share this post


Link to post
Share on other sites

Thanks bluesman, appreciate the comments..

Have resized some images so can show a few more bits now (my edge burnishing can be a bit erratic, especially when I run out of tragacanth.. I normally end up with beeswax and a piece of denim, frantically rubbing to get a nice shine)..

I prefer to work with quality brass fittings but sometimes use stainless steel. Only reverting to nickel plated if absolutely necessary

It's getting harder to get decent leather now because the price of hide has gone up a heck of a lot in the last couple of years so when I get back to it I'll just buy ready cut straps, whereas before I used to get large offcuts for 1/3 the price they are now.

post-34366-003175000 1345996638_thumb.jp

post-34366-078984000 1345996648_thumb.jp

post-34366-006852100 1345996656_thumb.jp

post-34366-030454000 1345996664_thumb.jp

post-34366-041397200 1345996678_thumb.jp

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...