Jump to content
Sign in to follow this  
raysouth

Logo For Makers Stamp

Recommended Posts

Hello Friends,

I need some tips/advice on how to come up with a logo/design, not very complicated, to place on an makers stamp no larger than a 1- 1/2" oval.

I am not a creative/talented artist and always have to seek assistance for my projects. I do come up with plenty of ideas for my leather creations when it does not involve drawing or interesting art topics. Mechanical ability in art is a-ok but not very adept with logo material.

Name I will use is my shop/studio name, "BIG SWAMP LEATHERWORX", and assistance or ideas will certainly be appreciated. All I have managed to come up with is a clump of reeds/cattails as seen on some of the leather stamps but had hoped to find something a bit "neater".

Thought about gaping mouth croc/gator but not able to locate artwork that depicted a good angle.

Hope someone can help.

God Bless.

Edited by Helmut

Share this post


Link to post
Share on other sites

what about a Cypress tree with Moss Hangin from it with water around it....

Share this post


Link to post
Share on other sites

what about a Cypress tree with Moss Hangin from it with water around it....

Share this post


Link to post
Share on other sites

Thanks Luke. That was FAST----- Had to correct plenty of typos and you had responded by the time I was finished. Many thanks and adding that one to the list. Didn't think about cypress and that is strange as I have done a good bit of pyrography on cypress knees and have a cypress slab leaning against the wall that is @ 30" +/- in diameter. My world must be small, not being able to think of things. lol.

Thanks again.

what about a Cypress tree with Moss Hangin from it with water around it....

Share this post


Link to post
Share on other sites

Thanks Luke. That was FAST----- Had to correct plenty of typos and you had responded by the time I was finished. Many thanks and adding that one to the list. Didn't think about cypress and that is strange as I have done a good bit of pyrography on cypress knees and have a cypress slab leaning against the wall that is @ 30" +/- in diameter. My world must be small, not being able to think of things. lol.

Thanks again.

Hope i could be of help to you...........

Share this post


Link to post
Share on other sites

If you want a graphic logo, start by listing images that have a pertinent meaning to you or your business.

If you come up with some visuals, I can photoshop them into an oval logo that's suitable for making a stamp.

tk

Share this post


Link to post
Share on other sites

s when it does not involve drawing or interesting art topics. Mechanical ability in art is a-ok but not very adept with logo material.

Name I will use is my shop/studio name, "BIG SWAMP LEATHERWORX", and assistance or ideas will certainly be appreciated. All I have managed to come up with is a clump of reeds/cattails as seen on some of the leather stamps but had hoped to find something a bit "neater"

God Bless.

Hi Helmut:

I had an idea similar to Luke's so I drew this very quickly in paint.net. You are welcome to it ... no charge. Perhaps someone can make it nicer for you.

post-26936-044196000 1328990545_thumb.jp

Edited by Sylvia

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...