TjMcDaniel Report post Posted September 22, 2010 We currently have an Adler 67-gk373 that we bought used (very used). It can be tempermental at times, but has now developed a new set of issues. Prefer to have a service manual as we believe the timing may be off....just guessing here. Any feedback regarding this machine would be appreciated. Also if there is a service center located somewhere near SW Oklahoma, please let me know... Thanks, TJ Share this post Link to post Share on other sites
dirtclod Report post Posted September 22, 2010 I'm not sure if this the right manual or not http://www.sewingmanuals.com/Sewing_Machine_Manuals/Adler.htm . It's about half way down the page and cost 14.00 . Share this post Link to post Share on other sites
TjMcDaniel Report post Posted September 23, 2010 I'm not sure if this the right manual or not http://www.sewingman...nuals/Adler.htm . It's about half way down the page and cost 14.00 . Thank You. I'm gonna give it a try! Share this post Link to post Share on other sites
dirtclod Report post Posted September 23, 2010 Your more than welcome. I hope it works for you and your able to trouble shoot your machine. Share this post Link to post Share on other sites
Lil Doodler Report post Posted October 4, 2010 Howdy! Don't know if it's too late, but here is a little info . . . I found an operator's manual for the 67 & 167 Adler. It doesn't have timing instructions, but I wonder if the slip clutch mentioned might be part of the difficulties you were describing. this operation manual is in several different languages, so scroll down for the English part. http://www.duerkopp-adler.com/export/sites/duerkoppadler/commons/download/public/167/167.pdf Also, if there are other models close to your Adlers, they might have service manuals at the main manual page: http://www.duerkopp-adler.com/export/sites/duerkoppadler/commons/download/public/167/167.pdf Good luck to you! Doodler Share this post Link to post Share on other sites
