why

Shoe assembly machinery are: 1, adhesive shoe molding and shaping machine Adhesive forming and shaping machinery shoes are: nail end machine, after the pre-molding machine to help the former to help heat machine, stretch to help the former machine, stretch the help machine, stretch machine to help after the hot air setting machine, hot air wrinkles machine Splitting Machine, followed by seat shaping machine, to help foot tie machines. 2, adhesive upper end of the assembly machinery Adhesive upper end of the assembly machinery are: marking machine, raising machine to help the foot, with outer soles of sanding machines, gluing machines, dry impatient activated machine, glue lamination machine, cold forming machine, from last machine, nail followed by machine . 3, other molding and assembly machinery Other molding and assembly machinery are: injection molding with help, vulcanized shoes, cans, liquid molding machine, sewing machine outside, inside sewing machines. Shoes after finishing machines are: to help port after setting machine, boots setting machine, Folding Machine, to help knock the EOC mouth, upper polishing machine, Eyelet Machine and so on.

Recently, Health Canada issued a child on the Plastic Toy, Plastic Intelligence Toy, Plastic Building Block Toys surface coating containing a particular heavy metals notice. Notice to remind the children's Plastic Toy manufacturers, importers and retailers, children's Plastic Toy heavy metals must be tested and fully comply with Canadian laws and regulations before we can enter the Canada Child Plastic Toy market sales. Notice also announced a Children's Plastic Toy legal limits of heavy metals and testing methods. Children's Plastic Toy enter the Canadian market need to meet Canadian "Hazardous Products Act" and "dangerous products (toys) Ordinance", the regulations, if a child Plastic Toys, Plastic Intelligence Toys, Plastic Building Blocks, equipment and fun for children to learn other products The total surface paint contains lead, a specific migration of heavy metals and mercury may be compounds, such children are banned in Canada Plastic Toy promotion, import or sale. All children Plastic Toy manufacturers, importers, distributors and retailers have a responsibility to ensure that, in Canada, promotion, import or sale of any child Plastic Toy (including second-hand toys) have been found "dangerous Products Act" provides that all applicable safety requirements. The circular also highlighted in the Children's Plastic Toy products used during manufacture of labels and decals also belong to the surface coating. Because, in many cases (especially in heavy metals), Canada's laws and related test method differs from the U.S. or Europe and therefore require special attention to relevant personnel. Inspection and quarantine experts suggest that the relevant agencies and the production of export enterprises, the market should be developed for different heavy metals in children's Plastic Toy detection limit requirements and the production response, the "on demand", while actively to understand the target market, changes in regulations, conduct a targeted testing, so be prepared for.

Please tell me the Shoe Machine, Folding Machine, Eyelet Machine, Splitting Machineuses and what each of their works and their methods of operation, some examples, please help? Thank all of you! !

Please tell me what fun Plastic Toy, Intelligence Toy, Plastic Building Block toys, some examples, please help?

Childrens Toy is designed or intended for children under 14 years of age to play all the products and materials. Childrens Toy is natural for children to learn, learning society, learning tools for the adult world. Children is a relatively low sense of self-protection of consumer groups, by their age, limitations in the physical, intellectual has many limitations, a greater chance of injury, so Childrens Toy directly related to the quality of the product health and safety of children. China formally for electric toys, projectile toys, metal toys, doll toys, Plastic Building Block Toys, Intelligence Toy toys such as mandatory product certification, toys, products should meet the mandatory standard GB6675-2003 "National Safety Technical Code for Toys" and GB19865-2005 "Electric Toy Safety" requirements, in addition to toys, although not compulsory certification system, but also should meet the above state standards. Key indicators 1, toy signs and instructions for use. In accordance with national standards for children's toys must be marked with product performance standards, applicable age range, security alerts, installation instructions, and more. Current toy products on the market a "sign and Use "project failed mainly in two situations: the random labeling toys for the age range and the lack of the necessary security alerts. 2, the existence of small parts. National standard for children under 3 years of age should not use the existence of small parts of toys, and some for use by children under 3 years of toys containing small parts for the product itself or in the "reasonably foreseeable misuse" appears after the the loss of small parts and components. lead toy products, "small parts" project failed for two main reasons: First, defects in product design itself, the structure of small parts and components by default; the second is the production process of product components are fixed, bonding strength is not strong or material shortage, resulting in the abuse of state formation occurred or broken parts off a small part. 3, the sharp tip and edges. Sharp cutting edge and the edge is an important Childrens Toy dangerous risks. Unless the necessary functions (in this case must have the relevant functional sharp point and edge of the warning note) for use by children under the age of 8 toys should not be touched with the risk of a sharp point and edge, and for children under 3 years old can play with toys in the functional reach and the edge of the ban there is a sharp point. Metal, Plastic Toy in the production process there is often glitches, such as overflow edge phenomenon, making toys, a security risk. 4, the projectiles kinetic energy. Projectiles kinetic energy projectile toys reflect the energy of projectiles fired, if more than 0.08J kinetic energy projectiles should be used as a protective end of the elastic material, making the projectiles kinetic energy of the contact area of the unit does not exceed 0.16J/cm2 . If the toy catapult launching projectiles kinetic energy is too large, and did not take appropriate protective measures, easy to cause serious injury to children.

○ Paint Toys Lead paint in toys, lead is widely recognized as the central nervous system development of one of the environmental toxins, baby gastrointestinal tract absorption of lead than adults, about 5 times higher. Now many of the toys to be used in painting, such as: metal toys, coated with a paint color pigments of Plastic Building Block, Plastic Toy, balloons and books with patterns such as an album. ○ metal toys Some toys to become a grade, but on the surface of metal materials. In fact, quite harmful to children. Metallic materials may contain arsenic, cadmium and other active metals, children like to lick, bite toys, if excessive levels of these elements long-term exposure will cause harm to children. ○ plush Intelligence Toy Intelligence Toy plush padding may exist pollution, plush off, is not conducive to the spread of germs and other child health problems, in particular, the price is too low a number of informal products, a problem more serious. Some plush Intelligence Toy clothes also contains harmful chemicals phthalates, it would have an impact on human hormones, may damage the human liver, kidney and reproductive organs, and cancer risk. ○ Noise Toys Noisy toys, hearing of infants and young children are becoming more damaging. Many toys as high as 120 dB above the noise. Such as: Some toy phone has reached 123 db of noise, some children play with assault rifles, artillery, tanks, trucks and other toys, within 10 cm, 80 dB or more noise. If the long-term stimulation by noise, children become easily agitated, the lack of tolerance, lack of sleep and lack of concentration and so on.

With China's footwear industry to speed up transformation and upgrading, the German high-tech footwear, leather technology providers are increasingly turning to China-related industries. The just concluded its nineteenth Guangzhou International Footwear Fair, by the German Ministry of Economics and Technology and the German exhibition Trade Association, composed of 10 German companies German National Pavilion collective appearance and become a major highlight of the exhibition. With higher production efficiency and meet the latest environmental requirements, the German leather footwear and other leather craft and technology in the international market with high reputation. According to statistics, last year, shoe exports to the world of Germany and Shoe Machine , Folding Machine, Eyelet Machine, Splitting MachineEquipment 36 million euros, ranked fourth in the world. As Asia, especially China has become the world's most important base for the footwear industry, the German footwear industry in China increasingly strengthening technology and equipment sales. Garment and Leather Technology Association of the German general manager, Mr. Elgar Straub said the Chinese share of global footwear industry for 63% of capacity, efficient production, flexible configuration and environmental protection are the key to future success.

REACH is the EU regulations "Chemical Registration, Evaluation, Authorization and Restriction" (REGULATION concerning the Registration, Evaluation, Authorization and Restriction of Chemicals) in short, is the European Union on access to their markets for preventive management of all chemicals regulations. About REACH regulations: 1, within the EU, in the manufacture, import volume of more than 1 ton of chemical substances harmful to them, use and so to register new chemical substances and 30,000 kinds of chemicals are all existing registered object. 2, the existing chemical substances harmful high production volume substances will first be registered. 3, the items included in the management of chemical substances contained in Requirements: The content of articles in more than 1 ton, in the general application of the material intended to be released under the conditions to be registered. Although there is no intention to release the item types, but the chemical content of the high interest in 1 ton / year or more and the content of the articles to declare more than 0.1%. Polymer required to register, but the monomer to form the polymer to be registered. REACH regulations in any case registered a single substance, in principle, on the preparations to be registered by components of the polymer can be exempted from registration, but requires registration of its monomer. Existing Chemical Substances in wide circulation and marketing, in order to avoid restrictions on the use of its resulting economic chaos, setting the stage used by the implementation of REACH, substances up step by step approach. In addition to registration, the relevant personal and business current well as some of the "prohibited" material. REACH regulations for certain hazardous substances, preparations and articles in the manufacture, placing on the market and use has been limited to the list of REACH regulations and will continue to improve. When the product contains the list of substances, the need to comply with REACH requirements. REACH regulation the main application By REACH regulations, only three categories of persons can submit applications for registration: (1) EU manufacturers (in the EU countries to settle and create substances natural or legal person). (2) EU importers (to settle in the EU and imports natural or legal person responsible). (3) non-EU manufacturers designated settlement within the EU "only representative. REACH program should: Here are the soft filling Plastic Toy, Intelligence Toy, Plastic Building Block enterprises encounter REACH related issues: Question: When guests ask us to issue / offer of a meet REACH requirements documents, how do we do? Response: When the company exports to the EU REACH framework is finished, through, and their upstream suppliers to contact, list all present in the finished product in total exports is greater than or equal to 1 ton / year of material, and to determine whether under normal or reasonably foreseeable circumstances will be released. while the control REACH regulation, to determine whether the product contains substances in the REACH regulatory framework provided under the high-interest material. When the product contains substances of high concern, you need to explain to the importer, and discuss and decide who is responsible for notification to the European Chemicals Agency. Specific process is as follows: The first step: to test the method to find the REACH regulatory constraints placed on the market or use of hazardous substances; by raw material suppliers, tracking the chemical composition of raw materials, with limited understanding of whether the incoming high-injection substance use harmful substances. Step Two: When the products, parts contain restrictions on the use of substances and substances of high concern, the next step how to do that? To Burongwanju general product, for example, the following components, materials likely to contain restrictions on the use of substances and substances of high concern are: Textiles: no harmful dyes and non-aromatic amines, non-carcinogenic dye itself, sensitization, acute toxicity, the use of formaldehyde and heavy metals can be extracted in a restricted amount of the following, without AZO, non-persistent organic pollutants, not will produce chemicals that pollute the environment, better than to disable the use of staining dyes. as a response to REACH the dyeing process used should also be taken to avoid staining with APEO dispersant. Plastic: PVC and PU material, especially, restrict the use of banned plasticizer content may be we are not sure that our products contain components of the chemical composition, in this case, it should require suppliers to help provide the following information: Materials / Parts List (BOM) - a product, a detailed list of the list of components, including the composition of all components (products, including textiles, plastics, glue, paint, wood and other materials.) Each material / components within the list of ingredients (BOS) - A list of detailed list of chemical components, including the chemical composition of each material (dyes, solvents, plasticizers and other chemicals). This can be achieved through the MSDS. The third step: we need to calculate each chemical component in each of the weight on the percentage of the market calculated on the weight, the following is the calculation brief (the importer as a single unit): Chemical composition of the share component of the total weight × × market × total number of on-market on a year-round bulk. To the weight and 1 ton / year to compare the requirements. If the calculation of chemical substances of high concern are listed as toxic substances, and an annual export volume more than 1 ton, you need to meet the reach requirements. Summarize our approach: Understand the REACH directive; Time tracking update instructions; According to REACH Annex XVII, the establishment of a list of banned chemical substances; As a corporate quality control indicators; to all material suppliers to disable the above list of chemical substances, and asked them to strictly limit the list of requirements; In each of the procurement of raw materials, suppliers must provide all relevant documents to prove that the list of raw materials meet the above requirements (such as MSDS, detailed ingredient list and test reports) If there is a need to consult the test center (the preparation of MSDS, risk assessment and testing) the above steps completed, the next business enterprise should determine who should complete the pre-registration and registration: business at home and abroad in the EU importer or only representative ; sure the registration is expected to prepare their own time; same time, enterprises should set up a special group and REACH REACH regulation in response to strengthen the financial budget.

Automatic Trilateral Folding Machine is the ideal folding plastic molding products, equipment, which applies to the hard plastic covers and plastic film products of the triangular fold higher degree of automation, triangular heating plate with separate temperature adjustment so that each side of the heating temperature control with ease. The machine has optical security features, the cooling device, make your operation more secure, and rapid cooling after finished hem is widely used in plastic packaging in the card packaging. Automatic Trilateral Folding Machines main features: ※ electric infrared eye-safe design; ※ durable, adapt to long-term safety design; ※ time-saving, simple operation; ※ rapid preparation of production; ※ triangular temperature independent, so that the average temperature is three sides; ※ size of the molding of any size can be adjusted as needed; ※ Products can be customized specifications. Automatic Trilateral Folding Machine Technical parameters: Model A－30 Max egding size 330×420mm (Max times)(tines/min) tines/min Machine power 1.6KW (Power supply) 220V (Air compressor) 1HP (Overall dimensions) (L×W×H) 950×890×1560mm

Leather is leather, fur-based materials to textiles, plastics, rubber and other materials made into products for the general term, is one of the favorite one of daily necessities, and people's daily lives, but also the Defence Force to be goods. China is the largest producer of leather products, consuming and exporting countries. Leather products industry is part of the leather industry, known as less investment, quick, and other characteristics, is one of the pillar industries of China Light Industry. The development of leather products industry, both domestic and prosperity of the market to meet the needs of the people, improve people's lives level, but also to accumulate funds for construction; the same time, the leather products industry and foreign trade is closely related to expansion of exports, foreign exchange earnings for the country. Therefore, the leather products industry to meet people's needs and support national economic construction, playing a very important role. 1.2,Shoe Machine in the role of the production of leather products Leather is a typical labor-intensive production processes processing industry, machine production and quality of the protection plays a very important role. For example, two feet is the normal symmetrical, which requires about the same as a pair of shoes to wear comfortable. hand shoes is very difficult to do this, but the machine is completely able to do. Therefore, the leather products leather products processing machinery is an integral part of the completion of an important means of production of leather products, leather products industry is a measure of technical level of the landmark. With the development of science and technology, the technical measures can not be directly done by hand, and only use the machine to break through the limitations of human capabilities, reduce labor intensity and production costs, increase productivity, improve product quality. to achieve the production of leather products, mechanization and automation, for the development of the leather products industry has an extremely important role. 2 Shoe Machine features Shoe Machine Light Industry Machinery door as a class of class-specific machinery, as has similarities with other machinery, but also has its distinctive characteristics of professional machinery. 2.1, Shoe Machine range, variety Shoe Machine as an industry can be divided into: tanning machine, fur machine, footwear machinery, leather machinery, leather, machinery and other hardware accessories; to the process method, structure, etc. can be divided into for leather shaving machines, to the meat machine, shoe with Splitting Machine, stretch to help machines. 2.2,Shoe Machines structure, movement, processing principle very different, with varying degrees of complexity Such as leather in the drum machine can be considered a non-pressure or low pressure in the container can rotate the knife shaft and other machines and split the case with the tool (tool, die, etc.) to action-oriented processing machinery Most leather products, machinery is also in this category. solely from the mechanical structure and movement of view, the drum is relatively simple, to the meat machine, split, and other more complicated, shoe machine to help with a variety of even more stretched complex. 2.3 The processing of object structure, the special nature of Shoe Machine processing object is an animal skin, simply, animal skin is mainly made of collagen fibers interlaced weave. Paper plate with a face large and thin, soft and easy to deformation, high-elastic toughness, poor location and other characteristics. These features to determine the leather products processing power required is relatively large, but the force is more difficult, it is not conducive to machining processing. 2.4Shoe Machine poor working conditions As we all know, leather processing the majority of processes in the water, gas and various chemical materials, processing waste and other coexisting conditions, and processing machines in which all, it will suffer. As noted above, Shoe Machine yet so different. On the whole, its structure, with the action agencies, such transmission is still relatively complex, such as leather to go with the meat machine, shaving machine, split, etc, the system shoes of Splitting Machine, stretch to help machine, inside machines, outside machine, Eyelet Machine, Folding Machine, etc., the complexity can be used with any kind of industrial machinery (single) compared. However, if the accuracy of processed products from the requirements of say, Shoe Machine is relatively low, and thus conducive to machine design and manufacturing. Integrated to judge, leather industry machinery precision can be considered to be general (except for a few outside the machine), structural complexity of the general, special processing of the object, the stronger environmental adaptability of processing machinery. 3 China Shoe Machine Industry Status and Problems At present, China Shoe Machine Industry has a certain scale, the manufacturers of products in categories, specifications, quantity, quality and other aspects of development and improvement of a great, basic leather to meet the needs of enterprises, part of the paper machine has reached or close to international standards and exports 80. In recent years, a number of large enterprises involved in military production of Paper Machine, Paper Machine effectively promoted the development of industry, has formed a few paper machine manufacturing base, the Group. but we can not deny this fact: leather products processing industry in China is still a labor-intensive industries, even the most current and medium-sized enterprises to use leather, high performance machines is still based on "Ocean Machine," which, made with quality leather machine Paper machine advanced, there is still a gap. China has a vast market of leather machines, leather machines can be some domestic companies are recession, it is indeed a contradiction. 3.1 The lack of Shoe Machine Shoe Machine Design Theory is the fundamental crux of the technology behind Any disciplines, regardless of their size, difficult and easy, complex and simple, all its corresponding theory, the lack of discipline is the theory behind the subject. Chinese leather industry has a long history of liberation, but also for the Chinese leather industry the cause of socialist construction and make its due contribution, but discipline has been seen as a small leather subjects, for the leather industry services Shoe Machine Industry can only be a foil, though forty years have been developed, but did not establish their own design theory. Shoe Machine industry to develop, we should first establish the discipline of design theory, which is developing the fundamental key to key, relevant departments should be encouraged to support experts and scholars writing about Shoe Machine's books, for the early establishment and improvement of China Shoe Machine design theories. 3.2 research efforts is not enough, unable to promote industrial development Shoe Machine In the absence of theoretical guidance for the design case, increased research efforts do not just stay in the import, copy, then we will be forever behind. Although domestic Shoe Machine specializes in the research institutions and staff is small, but this does not prevent us research. solely on the mechanical industry sector research institutions, China has a strong scientific research, but also a precedent for the success of cooperative research. So the question is how to carry out research. Increased research efforts in the affirmative, does not mean that only invest a lump sum funding, construction of several research institutions. We should break the bound of the industry, in large policies, the industry competent authorities should co-ordinate the planning, formulation of development plans, regularly publish information on key technologies, broad strokes of various research institutions to conduct research on specific design problems, skin machine companies and research institutions should take the initiative to strengthen cooperation, joint research, cooperative development, cooperative design. 3.3Shoe Machine shortage of professionals, limiting industrial development Shoe Machine Lack of local business professionals in the skin, mainly because we do not train Shoe Machine expertise, is to develop, and Paper Machine enterprises do not move, unable to retain. No matter what specialized machinery, the mechanical principle is the same, as long as Training students to master a solid mechanical design theory and methods, good appropriate for specific issues solution, this kind of professional wide, solid theoretical basis for specialized training of students of students than the capacity of much stronger, and this has been proof of the theory and practice. The quality of talent is to develop, rather than the form in the professional setting. Great efforts to strengthen institutions and other departments within the Department of leather cooperation to solve the problem of talent shortage Shoe Machine is the best way. 3.4 The design capacity, the low level of manufacturing technology and equipment behind, it is difficult to produce high-quality, high-level machine Modern machines are mechanical, electrical, hydraulic and pneumatic products such as technology integration, Paper Machine has become more modern, such a complex machine design put forward higher requirements, such as reverse engineering, reliability engineering, optimization design, CAD / CAM technology, electromechanical integration, ergonomics and other modern design theory and methods are a designer should have the knowledge. universities in the curriculum, training models have a forward-thinking, service design should continue to learn and acquire new knowledge, improve design capabilities. "Shoe Machine poor industrial infrastructure, design theory is imperfect, inadequate research, professional talent shortage, is the introduction of copy-based", which is that China is a true portrayal of Industrial Shoe Machine, Shoe Machine is also a low level of China's backward The most fundamental. and realize the leather production mechanization and automation is the fundamental way of its development. 4 Problems in China's leather industry causes and solutions Paper Machine in China are generally small and medium sized enterprises specializing in the production, and its backward technology and equipment in general, and some plant equipment several years co-exist, how can we create advanced, high-quality machines? Increased investment for technological transformation is imperative, should follow the joint, forming enterprise groups the road, a concentrated human, financial and material resources, create a fist, brand name machines. Now find the reason, we have to think about a solution, the above analysis, I believe that the increase of the current transformation of the NC Shoe Machine is the best way to resolve this contradiction. 5 on the CNC transformation Shoe Machine 5.1 The concept of CNC technology CNC technology is the 20th century, 70 developed a machine tool control technology. Thirty years, with electronic devices, computers, sensing and detection, mechanical manufacturing technology continues to progress, to electronic information technology, set traditional mechanical manufacturing technology, computer technology, group technology and modern control technology, sensor monitoring and control technology, information processing, network communication technology, hydraulic and pneumatic technology, electromechanical technology in one numerical control technology has been the rapid development and wide application, making general machinery gradually by high efficiency and high precision numerical control equipment is replaced, forming a huge productivity, leading to fundamental changes in the manufacturing sector. CNC technology has become the foundation of modern manufacturing technology, the level of its ownership and the number of CNC machine tools measure of a country has become an important symbol of industrial modernization. CNC technology in the machinery manufacturing industry has been widely applied because it effectively address the complex, sophisticated, small groups of diverse parts processing problems, to adapt to the rapid replacement of various mechanical products need to enable enterprises to quickly respond to market demand the ability to greatly enhance its significant economic benefits, specifically in the following areas: 1. Production efficiency, increased by 3 times than ordinary machine 5 times; 2. To reduce tooling, reduce human error and improve precision, has broad applicability and flexibility; 3. Shorten the trial of new products and production cycle, easy to organize multi-variety production, enabling businesses to respond quickly to market demands; 4. Can not be processed general machine tools for processing large and complex parts; 5. Can reduce labor intensity and improve working conditions and save manpower, reduce labor costs; 6. Can be realized software error compensation and optimal control. 5.2 CNC transformation of the purpose and significance According to materials, China now has more than three million machine tools, CNC machine tools of which the total number of only 113,000 units, most of all the accumulated production of general machine tools, more than 10 years of military age accounted for more than 60%, 10 years of machine tools, automatic, semi-automatic machine less than 20%, FMC / FMS and other automated production line is very few. Currently, the measure of a national army, the people of modern machinery manufacturing industry is an important indicator of the level of ownership in the machine the proportion of NC machine tools (CNC rate). In this regard, developed countries have already reached more than 20%, while China is only 1.9% (1995 industrial census data), so there is a major gap. In view of China's specific conditions, To have the amount of the NC machine to catch up with the foreign rate, high degree of automation in the short period of time the equipment with a large number of updates, alternative, in terms of money or from the production capacity of China's machine tool factory look is not feasible, We can not discard a large number of general machine tools are being used in favor of, the high-end CNC machine tools, which rely solely on acquiring new CNC machine tools, is the financial resources of developing countries like ours can not afford, and for generally belong to small and medium leather business, this is particularly evident. Therefore, we must actively promote investment, large effective transformation of the old experience of CNC machine tools, machine tools using CNC technology to automate the ordinary or modified to enhance their precision NC rate. 5.3 The transformation of China Shoe Machine feasibility of NC Shoe Machine transformation of China's existing comprehensive analysis of: 1. Technology: In the past few decades, Shoe Machine little change in the basic operating principle, but the social productive forces, especially the microelectronics, computer technology has developed rapidly, reflected in the machine tool control system, it can raise machine degree of automation, but also to improve accuracy. Practice has proved that the machine modified to meet both the technological progress and higher productivity demands, but also improve the accuracy of the product, increase the scope of surface processing, but also enhances its ability to adapt to many. This also illustrates the technological transformation of the old machine numerical control on the feasibility. 2. Economic: As the new machine is expensive, a huge time investment, all equipment if the old machine to new machine replaced, the state must spend a lot of money, and replace the machine will idle up and down the wastage, the use of a technological innovation to achieve modernization, the more than 50% can save money. from China in terms of the specific situation, a set of economic NC unit price of only full-function numerical control device 1 / 3 ~ l / 5, general users can afford. This financial strain technical development of small and medium enterprises to create a new path. 3. Market: According to national statistics, order a new CNC machine delivery cycle is generally longer, often can not meet production requirements. Therefore, the transformation of CNC machine tools to meet market demand has become the primary complementary means. 4. Production: industrial production in the machinery, variety, small batch or single production is the basic feature of modern machine building, occupies a large proportion. To complete the production task, nothing more than select the general machine tools, special machine tool or CNC machine tools, CNC machine tools can best meet the needs of such production. From the above analysis is not difficult to see that the old machine numerical control technology for the transformation is feasible and is necessary: This is to improve the machine performance can be achieved greater economic benefits. Computer numerical control machine tools for mechanical processing has matured. In recent years, China has successfully developed a variety of CNC controlled machine tools, including digital control technology for transformation of the old machine numerical control technology is an important aspect, with numerical control technology The purpose of transformation of the old machine tools, primarily targeted to address the following issues: 1) Accuracy of machine tools dropped solve old problems; 2) improve machine automation; 3) extension machine functions. At present, China has been a variety of models of economic numerical control system come out. To the current situation, China Shoe Machine industry, many types of CNC machine tools has not yet been modified. Therefore, the transformation of the old NC machine tools is necessary, but also entirely feasible. Shoe Machine accuracy requirements are generally normal (except for a few outside the machine), structural complexity of the general, special processing of the object, the stronger environmental adaptability of processing machinery and therefore applicable to NC with the economic transformation. The so-called economic NC, generally are low-end digital technology, it is mainly by the micro-computer and the stepper motor drive system consisting of a simple numerical control systems and other features, low price of CNC system. Currently, the CNC machine tools on the one hand to the multi-functional, high-speed direction, while developing simple CNC equipment, CNC system using economic transformation of the old equipment, numerical control technology is an important aspect of the industry. 6 Conclusion To sum up, China Shoe Machine has entered the age of universal, such as do not carry out technological transformation is bound to be outdated, while the transformation of existing CNC machine is the best way to solve this problem. The machine is the product of machine tools, there is no high-quality machine tools to make no high-quality products. The information that the future of China's leather industry is bright, but the equipment on active service in China has entered the leather business adulthood, old age, a new round of technological transformation of enterprises of the upcoming. hope that China Paper Machine companies can seize the opportunity to take up responsibility, sing praises protagonist, the development of leather industry in China to make its due contribution.

Research shows that 83% of the information into the brain from the visual image. Newborns 3 days will be able to focus attention, especially in the face a clear preference, 3 months, they can take the initiative to search for stimuli, 4-5 months initially with stereo vision. to 1-2 years of age can recognize a variety of shapes, 3 years old began to voluntary attention, so the visual attention training in mental development and culture have played a very important role. Each stage has its own developmental characteristics. Baby 0-3 months to see more focus on training to guide the focus on attention, with the shifting line of sight, and touch with hand grip, with the toy can be a mask, color ring, bell bar, etc. Wow. 4-6 months baby hand-eye coordination training focused search of objects, Shuang Shouzhua objects for grasping objects, extract box, pinch the thumb and index finger to take so toys can be hung with a Plastic Toy, pinch the soft plastic ring toy. 7-9 months training focus is a combination of picture understanding of the daily things around, recognizing facial features, training Shuang Shouzhua, for grasping, throwing, etc., focusing on children with attention, observation, memory training, promotion of curiosity. With Intelligence Toy is Plastic Building Block and so on. 10-12 months training focus is to promote hand-eye coordination, such as take, put, wearing channeling, open, cover, press, pull, throw, pull, graffiti, etc., training of pictures, text, books, the attention and interest, began to learn songs , Picture Talk. Nutritional foundation for the visual development of taurine, unsaturated fatty acid (DHA, ARA) and vitamin A, parents should take a supplement for their children properly.

Recently, the Shoe Machine, Folding Machine, Eyelet Machine, Splitting Machine's main raw material for steel price increases substantially, it will undoubtedly increase the Shoe Machine, Folding Machine, Eyelet Machine, Splitting Machine production costs. The new labor law on enterprises higher demands of social responsibility, virtually increase the company's labor costs, which is facing the pressure of the whole industry. Many Shoe Machine Suppliers believe that the entire Chinese Shoe Machine is still good market prospects, will accelerate product upgrading, product quality requirements are high, especially in energy conservation and reduce labor cost requirements will be higher. So many Shoe Machine Company increase investment in development of new products, improve product quality. shoemakers addition to these requirements, but also require even lower prices, better service in place. China Shoe Machine market in the next 10 years or more optimistic, because the manufacture of shoes also can not leave China. But with the market development, will focus on, and some will be eliminated, and some will be stronger, especially in manufacturing enterprises. the market will be more dispersed, not concentrated in a few places, and other development market will be more and more countries, from a technical level, the mainland and Taiwan Shoe Machine Shoe Machine (Taiwan brand mainland births) is almost the same, some products have no difference. But European Shoe Machine still in some high-end products has certain advantages. Thus, the present European Shoe Machine Shoe Machine or occupy the mainstream of high-end, although this part of the small share of the total market. Taiwan Shoe Machine are still quite competitive, because they are almost all "mainland of ", and particularly in the Taiwan-invested shoe factory in the mainland, or the majority of their market share, estimated at 60%. Shoe Machines and equipment industry as a whole is a small industry, and the technical content is not too high, the development of the footwear industry with the mainland, the Chinese market gradually formed as the representative of the Italian foreign Shoe Machine, Taiwan and mainland China Shoe Machine Shoe Machine these three forces, these three forces have their own advantages: mainland products a price advantage, Taiwan brand products, and technical advantage over foreign products. As China's neighbors India and Vietnam footwear industry is developing very rapidly, largely driven from these countries Shoe Machine industry. And these countries Shoe Machine, Folding Machine, Eyelet Machine, Splitting Machine production costs relative to ratio is much lower in China. At present, Shoe Machine competition in the market power of the strongest companies or China Shoe Machine. Now, homemade Shoe Machine has replaced the Taiwan Shoe Machine, Shoe Machine in the middle and low market dominated by about 70% share. Future of the industry will be bigger and bigger, the market capacity will also continue to increase. But in the current Shoe Machines industry, large enterprises with capital, technology, human resources, market, and many other leading edge in the market competition will gradually a fixed pattern, regulate the health of enterprises will be better and better, market resources will gradually form a fixed pattern, regulate the health of enterprises will be better and better, market resources will be gradually concentrated on large enterprises, which operate unhealthy Enterprise eventually be eliminated by the market. Shoe machinery industry is still great room for development, China has the largest market, the export industry has just started, technological development and innovation, there are many needs to be done, enterprises should strengthen management, tap potential, adapt to the development and changes, continue to study new technologies and new techniques, equipment and technology in learning Italian while learning the Italian enterprises have the scientific and standardized management, as soon as possible to shorten the gap between the Italian shoe-making machinery industry, shoe-making machinery from China as soon as possible so that power into mechanical power shoe.

China's toy exports in order to rise, enhancing international competitiveness imperative! 80 years from the last century, China began to toy manufacturing industry from foreign toy manufacturers OEM toys. After nearly years of development, China has become the world's largest toy manufacturing base. However, because of China's toy industry has been too dependent on foreign markets and brands, led Although China is Plastic Toy, Intelligence Toy, Plastic Building Block toy manufacturing country, but has not been among the toys powers. And because the Chinese toy industry is very dependent on exports, so the outbreak of the financial crisis is to the development of China's toy industry poured cold water. Although China's toy exports have been the trend of recovery, but the Chinese toy industry with international peers but the huge gap between the can not be ignored: the existence of Chinese toys, brand-building lag, lack of design capability, technological content and low added value and so on. Therefore, to promote the sustainable and healthy development of export toys, toy products to enhance the international competitiveness of Chinese toy exporters still pressing issue. China's toy export enterprises their own problems China's toy industry has always been an export center, the historical factors that led to the development of China's toy industry's lame, there are many fatal. First, the production is small, low-tech products. Most of the Chinese toy companies after the reform and opening up the development of small and medium private enterprises, engaged in the Plastic Toys, Intelligence Toys, Plastic Building Blocks toy production and processing, does not have the size advantage, competitiveness is not strong. while China exports lower value-added products to the traditional toys, so while in foreign markets has dominated the traditional toys, but the technological content of products is very low, compared with the total high-tech electronic toys no competitive advantage. Second, China's independent brand awareness is not strong, most of the enterprises engaged in OEM production. The OEM way, so that China became the world's toy factory brand, few Plastic Toy enterprises with independent intellectual property rights and independent brands. The and the United States, Japan, the toy industry, the Chinese toy industry has been neglected is brand building, combined with the lack of technical support, cultural and professional designers rely on to make toys, a brand has been severely affected, the toy industry's overall international competitiveness is not strong, you can not get rid of the status of big but not strong, hindered the sustainable development of Chinese toy companies. Third, China's toy products are mainly designed for children, adult toy market is very small. The actual situation is compared with the Child Toys, Adult Toys has a larger profit margin. China Social Survey Office survey, China 64% of adults said that if conditions permit, consider buying toys, of which 33% of adults said they liked and are willing to buy toys. At present, China's elderly population is rising, they are also a huge potential consumer groups. According to the China Toy Association predicted that China's demand for young adult toy market is only up to 500 billion yuan a year or so, adult toy industry's profits to be up to 100% - 400%. such a large market potential, the Chinese toy companies just ignored.

China Fujian Shoe Machine, a late start from scratch, along with the footwear industry, especially in Quanzhou, Fujian footwear industries were developed. Not only that, Fujian Shoe Machine weak economic foundation, the lack of appropriate industrial background, but with the local the development of the footwear industry, together with the local operators of the geographic advantage and an "love spell love to win" spirit, from the initial sale of the old machines, trade and the maintenance of a number of skilled workers and so began the development of industry in Fujian Shoe Machine . After more than ten years of painstaking efforts, Fujian Shoe Machine Shoe Machine industry in the country gradually emerge and become Shoe Machine industry break out of the new dark horse. Jinjiang: Shoe Machine fertile ground for the industry Jinjiang is Shoe Machine, Folding Machine, Eyelet Machine, Splitting Machine fertile ground for development. Jinjiang, Fujian, as our production sports shoes, sneakers, casual shoes, the largest area, there are currently more than 3,000 shoe enterprises, annual output of nearly 500 million pairs of shoes . In recent years, the city introduced a total of more than 2,000 shoe line (sets), the average annual technical investment 800 million yuan, is a mechanical system of Shoe Machine fertile ground for the development. embodies the system of Shoe Machine, Fujian mechanical strength. It is understood that the early 80s of last century, the Chinese system of mechanical industry, backward Shoe Machine, Shoe Machines production of mechanical products manufacturing enterprises to point-based, less product variety, low level of technology. And this time, and the surrounding areas of Jinjiang Footwear rapid industrial development, in order to promote the development of the footwear industry in Jinjiang of the system of Shoe Machine mechanical enterprises to fully utilize this opportunity, product technology and production scale has been rapid development, which are for Shoe Machine laid the foundation for development of the industry. the last century 90 years, and the surrounding areas of Jinjiang footwear industry began to enter rapid development period, Shoe Machine industry distribution of the significant features of a group from the shoe to provide equipment to equipment maintenance as well as secondary Shoe Machine operators with strong production now shoe-making equipment, enterprises have emerged. Now, through the initial stages of development in Fujian Shoe Machine forward another stage of development, these two years showed two significant changes: First, the ability to continue to strengthen self-development. Fujian Shoe Machine feature is rooted in a sports shoe industry, for the athletic footwear industry to do the whole factory support, Fujian Shoe Machine which is a competitive advantage. Now all process of the production of sports shoes required equipment, Fujian can produce. and start from the previous simple imitation, Fujian Shoe Machine has begun to embark on a road of independent research and production, from the sewing machine, cutting into the line, to help both before and after the independent production, even the technical content EVA injection molding machine has a high energy production. Second, the product begins to come out of Fujian, China. Technology is mature, stable quality products Shoe Machine Fujian province and even began to be popular abroad. Now Fujian Shoe Machine has begun to penetrate outside the province of Guangdong, Zhejiang, Hebei, Shandong, and well ocean related to Egypt, the Middle East and other countries and regions. but in the development process, Fujian Shoe Machine there are some disadvantages, such as financial troubles, government support is weak, do not speak the trade price and the blind pursuit of price competition and so on. In addition, continue to invest efforts in the development of the industry, passion is not enough. On the other hand, the current owners to Fujian Shoe Machine production, management is still in the fragmented state of the situation, the most obvious is the existence of unfair price competition. Jinjiang Shoe Machine particular industry is facing strong foreign competition and the domestic industry's "encirclement and suppression", the industry overall speed is imminent. To this end, industry experts suggest that the industry must be established in Fujian Shoe Machine overall development objectives, a clear direction, develop effective approach to development. Foreign and domestic Shoe Machine industry is a competitive industry, how to properly grasp the feasibility, practicality advantage, should be the exception, Fujian Shoe Machine sector peer attention and concern. in the face of most of the International Shoe Machine manufacturing industry started early, influential, and Fujian Shoe Machine manufacturing relatively late start of the "congenital deficiencies "before, Fujian Shoe Machine industry is imperative to create Jinjiang Shoe Machine brand.

<Deutsche Welle>and<The Wall Street Journal> reports, the EU said the Chinese government has taken measures to ensure that their exports meet international standards, opposition to prohibited grounds of safety and health practices of Chinese Plastic Toy imports. European consumers this year as a result of the repeated Plastic Toys made in China affected by the recall, the EU has asked China to strengthen the inspection of export products. EU assessment of China's efforts in preventing dangerous products into the European market, the Chinese practice of correcting the past, and now the situation has improved significantly. EU consumer protection commissioner, Ms. Kuneva said China has made in encouraging the export test results. China's inspection agency has cooperation with the European early warning system to early detection of dangerous products. EU should continue to strengthen cooperation with China in this regard. At the same time, Kuneva investigation to the EU report also pointed out that China's production may cause harm to humans Intelligence Toy, Plastic Building Blocktoys in the United States and Europe, the main responsibility of large companies, enterprises and importers of the product is inadequate inspection, all the responsibility can not be pushed to China. Library requires European companies in China, its exports to Europe take the product from design to production monitoring responsibilities. She said the fact the relevant EU legislation is fully capable of ensuring product safety, the question is do people have to strictly follow the rules, and all EU member states must be held accountable enterprises. Library said the EU is currently discussing how to secure product marking. The current "CE" mark only "the European Common Market" means, does not mean that the safety of the product. People consider the use of "CE +" to indicate the safety of products. But the safety inspection must be made by an independent agency to do business.