Jump to content
Sign in to follow this  
wyldflower

buying first maul - tapered head or round?

Recommended Posts

I'm ready to upgrade from my lil ol wood mallet to a nice maul (King or Bearman) - as I understand it, with a maul there is less wrist flex than with a mallet, which for me would be a very good thing.

Unfortunately, I've never actually used a maul, and am wondering what the difference would be round vs. a tapered head?

I'd also be interested in hearing about what weight folks use for various applications.

I was able to heft a few at the local Tandy store and the 16oz seemed like a good all around weight? Right now I'm doing a lot of border work on 7/8 up to 13 oz stuff, and a little actual carving (maybe I should say I'm "practicing" carving! lol)

Thanks much

Wyldflower

Share this post


Link to post
Share on other sites

It really all comes down to personal preference. I like the tapered mauls in the heavier sizes for larger baskets and geometrics. I don't have to lift my arm as high to hit the stamp square. I use a 12 oz and 16 oz for most other stamps, and they are straight mauls. I tend to hover over those stamps a little more and so the higher motion is not the factor with the lighter mauls. I use my 16 oz the most for general tooling.

Share this post


Link to post
Share on other sites

AFTER GETTING THE MAUL AND GETTING ACCOUSTOM TO IT .... NO MORE MALLETTS FOR ME... :notworthy:

Share this post


Link to post
Share on other sites

Hi Wyldflower

I own both types of mauls, straight and tapered. After using the tapered maul, I like it better. If someone comes by and wants to start learning tooling, I start them on the straight and let them try the taper, they usually purchase the tapered maul.

I own Barry King mauls and am very satisfied with them. I have multiple weights. 16 oz for day to day tooling ... 14oz for lighter leathers 2-3 or 4-5 oz leathers and a 20 oz for heavy leathers / and basket /geometric tools.

Mauls are very much a personal thing. too light or too heavy ...NO GOOD!

Call Barry get him to send you a catalog, then call and talk with him and see what he would suggest for you.

Barry's phone 307.672.5657

Happy Thanksgiving and Happy tooling

Tim

Share this post


Link to post
Share on other sites

Bruce, Luke, and Tim,

Thank you all so much for quick replies and the info - very helpful. Bruce - your comments on ergonomics and lifting height is giving me something to think about.

I think I need to give Barry a call and see what he recommends. Thanks for the advice Tim -and phone number.

I'm glad I at least got to do a little "pretend tooling" to get an idea of what felt right. (Bless the good natured folks at Tandy - never even batted an eye while I was standing in the aisleway, pounding away on my imaginary workbench with their mauls ... )

;)

Share this post


Link to post
Share on other sites

AFTER GETTING THE MAUL AND GETTING ACCOUSTOM TO IT .... NO MORE MALLETTS FOR ME... notworthy.gif

I hear you on that, Luke! Me too!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...