Jump to content

two crows

Contributing Member
  • Content Count

    67
  • Joined

  • Last visited

About two crows

  • Rank
    Member
  • Birthday 12/12/1949

Profile Information

  • Gender
    Male
  • Location
    Ellinger, Texas

LW Info

  • How did you find leatherworker.net?
    computer
  1. Thanks Bruce, I ALREADY HAD ONE IN MY SHOPPING CART AT Berry,s I,m fixing to go get it... Thanks again .. MJ
  2. Who makes the best looking rope border stamp??
  3. I have a plotter, but its only 24 inch. Not sure what you are wanting to do. mj
  4. Hey yall ,,, before I found this website I never knew there was anything but Tandy Leather. It has served me well in my years of leather work. But now that I know of other options I try them as well. There are some great tolls and things that can be had and I have some of all of them. C ,, you have to improve on each attempt you make at doing a project. Quiting is not an option.... FORGET IT
  5. I always wear bib overalls as you can tell in my pic. A cold work area is not good, all these coments are good. You need to warm the place up, its hard to work if your bundled up like a eskimo. GET SOME HEAT IN THERE. Its suposed to be fun not torture... mj
  6. Titan DX Premium contact cement. Water base, no smell and it works great. I ran across this stuff when I was rebuilding a 100 year old pool table. I used it on all the vener work. Then I took it inside and used it on my leather work. This stuff sticks as well as anything I have used.
  7. I ordered a couple of tools from his web sight last night . They had emailed me today and said they were shipped today. He never answered my email either but I have had no problem ordering on line...
  8. Fast Pay is slow pay,,, and no pay is slow pay... Dont do anything for nothing they made money off of you and you got what the little boy shot at. mike
  9. Really neat work on the inside of this thing Nice work. mj
  10. I like em tell me about them, I want one.. mike
  11. Im waiting to see your shop. I hope you all the best with it I know you will do well mike

  12. Thanks Campbell,,, thats what I was trying to tell him also, I just wasn't smart enough to lay it out for him. Good job... mike
  13. Hi I have a milling machine and a lathe running on a 3 phase converter. They are on the same converter . You cant run both machines at one time and you loose some power but they work fine for my purpose. This converter is maby 6"x6" x 2" thick. I dont think it cost more than 60 bucks. You can also use a 3 phase generater but thats a hole nother motor and quite expenseve. If I can help you with some info let know.. Mike
  14. Hey Mike,,,, I used this cutter today to cut some 3in. x 6 ft straps for a saddle repair and this thing works great. Really slick..mike
×
×
  • Create New...