Black Dogg

Another vote for Wickett & Craig here! I started buying from them about six years ago and have never bought anywhere else since. Their leather is top notch, even the lower "special" grade is better than a lot of higher grades from other tanneries. Carves and wet forms very well! I visited them last year and got a tour of the place, which was amazing to see! All their hides are sourced from their own slaughterhouses in Canada and only from US/Canadian cattle. I thought their leather was priced pretty good, but after seeing firsthand how much work they put into each hide, I think it's really cheap! Just my $0.02

I just realized I never put the 2022 donation on here, so here are those pics for your viewing pleasure ! I had made a serving board and coaster set that year. The board was a piece of live-edge red elm with paw prints carved into each corner and sealed with Tung oil. On the back I put my maker's mark, "FECIT MANU" (Latin for "made by hand" since I don't have power tools) and 2022 in Roman numbers. The six coasters are Wickett & Craig bridle front and back and 1mm Tiger thread.

Resurrecting an old thread here, but I thought it kinda fits with the "picture" theme: After making more "practical" items for the last few year's auction donations, I had an idea for a carved picture again and went to town. It's hard to tell from the picture (my photography skills are not the best ), but the lettering and cabin silhouette are raised and the paw print is embossed. The rope border didn't come out quite as good as I wanted (was my first time using that stamp). The frame is mortise-and-tenon and held together only by the tension of the laces. To fancy up the hanger strap, I did a mystery braid on each side. All the leather is from Wickett & Craig; 8-10oz. carving for the picture and 5-6oz. English bridle for the hanger. Outside dimensions of the frame are 20" x 24".

Another happy LeatherStampMaker customer here!! Had my maker's mark and two other stamps made so far and they are great! Detail is outstanding, even with small script letters. I use both maul and a 1.5ton arbor press and they work like a charm. Their ordering process is easy and they are fast: All three times I ordered I had the stamp in my mailbox a week after approving the proof (that's clear across the country from CA to NY). Great company that's for sure!!

Well, the leash didn't come to pass. I wasn't quite sure how I wanted to do it and didn't have the right hardware for any of my ideas. However, digging through my stash I came up with an odd belt buckle I had squirreled away for something I don't remember. So I figured I'd make them a nice belt. All Wickett & Craig English bridle, the top is 5/6oz, the lining 3/4oz; sewn with 1mm Tiger thread. The buckle is held on with two Chicago screws, so whoever buys it can put their own on if they don't like this one. Would be a good belt for holding a handgun ! Next week we'll take a trip to drop off the goodies and visit with everyone at the shelter.

Lonewolf, that is definitely a Class 18 Duerkopp. I got one almost exactly like it and got it going again. Here's a thread I posted a while back: And here's one for the manuals: As far as finding parts, you'll have to either canibalize off another machine or find a really good machinist to make any parts you'll need. From what I understand, the Duerkopp factory was bombed in WW2 and all the machinery and patterns were destroyed. When Adler bought them out, they didn't bother with Duerkopp's design, since they had their own patcher. Whatever you do, don't loose the shuttle for the bottom spool! I've had two machinists look at mine to see if they could replicate it, so I would have a spare, but neither one was able to do it (even with all the CNC tooling!). I see yours still has the drawer and original slide-on table. If you decide to take her apart, don't loosen any of the guide wheels that are attached to the shafts that run inside the machine. These have to be exactly aligned or the machine won't work. When I cleaned up mine I used a lot of Kerosene to soak and loosen all the hardened oil and grease. After getting most of the goo out of the head, I used petroleum jelly (vaseline) and a good sewing machine oil to lube everything. For needles, you will need "System 88" or 332LL . I'm not sure if anyone still makes System 88 needles, but 332LL are available on Amazon and other places. Good luck with your project! Black Dogg

I haven't been able to do much in the last couple years (that little thing called "work" got in the way ), but lately I've had some spare time and dusted off my tools. The first pic shows four coasters I made for the animal shelter's gift shop. Front is regular veg tan, back is bridle. The basketweave shows it's been a while . The Celtic coasters are an order and made from bridle, both front and back. I tried some carving in bridle last month and was surprised how well it cut and stamped. All leather is from Wickett & Craig, the thread is 1mm Tiger thread. Next project will be a fancy leash for the shelter's spring auction; stay tuned for pics !

Here are some pics of my latest piece of "machinery": Living in an off-grid cabin, I don't always have enough power to run a Dremel (and definitely not a bench grinder), so I built this treadle burnisher. I bought a sewing machine treadle on ebay and put a table top on it. Then I added the double-ended mandrel ( https://www.constantines.com/mandreldoubleended.aspx ). On the left I put a felt wheel with green (x-fine) compound for polishing knives and other cutting tools. The right side has a regular drill chuck for attaching the leather burnisher (from Pro Edge Burnishers) or any other rotary tool. Some new sewing machine belting from McMaster-Carr ( www.mcmaster.com ) lets it spin like a top. I already put a razor-edge on all my leather knives and the burnisher works great, too. Talk about some shiny edges!

Yes, it's still here. But I have no idea how much it would cost to ship overseas. Based on previous small envelopes I've sent to Germany probably around $ 15 to 20. It gets pricey really fast once you put anything other than a sheet of paper in. Hope this helps! Black Dogg

Knife #1 and #3 are sold pending funds; #2 is still available. Black Dogg

I recently upgraded to a new swivel knife and figured, since I can only use one at a time, having four around won't do me any good. I know that the price of tools is high, especially if you're just getting started and want to get the basic tools for yourself. That's why I'm making the following offer for folks new to the hobby: I have three swivel knives for sale; two are adjustable (#1 and #2) and come with a narrow, straight blade and one is non-adjustable (#3) and has an angled filigree blade (for detail work and small carvings). They are the basic Tandy models, but I have cleaned and lubed the swivel with sewing machine oil so it is a lot smoother than out of the box. I also sharpened and stropped the blades (when you get them from Tandy they don't cut well) so they are ready to carve when you get them. I will sell these for $ 10.00 each (postage included in CONUS) plus with each one I will throw in two random Craftool stamps (I have some duplicates that I acquired over the years). Please PM me with the number of the knife you would like and your address. Payment is by USPS money order. I will reserve your knife once I get the PM and send it out as soon as I get the MO. Black Dogg

Hi Roland and welcome to Leatherworker! This glue here https://schuhbedarf.de/klebstoffe/klebstoff-dosen/haller-hirschkleber-innenkleber-lederkleber-das-original-600gr.-dose.html is what I would use. Barge's or any other contact cement certainly work, but Hirschkleber is all natural and doesn't have the awful smell of the solvent based cements. Also, a little goes along way; that 600g tub will last you for a long time. I've had mine for ten years and it's not even half gone. If it turns thick over time, just mix a little water in it. I also second what Mattsbagger said above! Good Luck and post some pics when you're done ! Black Dogg

That's me; I'm an '81 vintage!

Shoepatcher, there's a few pics in the thread I posted three years ago (see above). If you're looking for some close-up shots, let me know and I'll see what I can do. How did come by FIVE of these, anyway? Did you buy them from private sales or was there a dealership somewhere over here? I didn't think there'd be so many over here; I had figured they were more of a European machine. Black Dogg

Yup, that's me . By the way, when I watched your vid of the restored machine in action, I noticed that in the beginning you seem to be threading the shuttle the wrong way. According to the manual, the thread comes off the spool, out through the long slit, back over the spool and then out through the center hole in the other side. If you need more tension for the bottom thread, you have to feed the thread back inside through the second hole and out the third again. I guess some shuttles even had five holes for really high tension in extra thick leathers or multiple layers. Finding that manual was a godsend for me; I had spent hours trying to figure out all kinds of different ways to run the thread but just could not get it to work right. Another difference between your machine and mine I noticed is the flap covering the threadhook on the back of the arm. Yours swings down to open; on mine it is hinged and swings backwards. Black Dogg