Jump to content
Sign in to follow this  
gottaknow

Removing Hair From Sheepskin Edge

Recommended Posts

Hi folks, I'm wondering what if any tool or machine can be used for removing the hair from the edge of sheepskin so that it can be machine sewn, with or without binding. We're using it on down jackets around the rim of the hood. I'm thinking high quality electric shears with a vacuum attachment. Anyone? Thanks in advance.

Regards, Eric

Share this post


Link to post
Share on other sites

Yup...animal clippers will do it. Just be sure to use a fairly coarse blade so it will go through it easier.

Share this post


Link to post
Share on other sites

Thought I'd share my solution to trimming the edges of sheepskin hood trim for down jackets we're making in the factory. We had about 900 of these to do before the binding could be put on with a Singer 153k. After binding, the trim gets buttons and is fitted into the brim of the hood. That way it's removable. The clipper are heavy duty Wahl, made in the USA. I fashioned a guide out of an old presser foot which follows the edge of the ruler to trim exactly 1/2" of the hair off. The clamp is raised with an air cylinder controlled with a knee switch. The vacuum is routed through a momentary foot switch for hands free operation. We're half way through the 900 with no issues other than keeping the clipper oiled. These are amazing clippers by the way.

Regards, Eric

Share this post


Link to post
Share on other sites

That's a slick solution to a hairy problem!

Bill

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...