Jump to content
natenaaron

Why Is The Leather Wrinkley?

Recommended Posts

If you go to 4:45 and freeze the frame the leather looks kind of wrinkly but in a weird way. Why is it like this?

Share this post


Link to post
Share on other sites

I looks like the leather was rolled backwards. Flesh side out. That will always make wrinkles like that.

Share this post


Link to post
Share on other sites

Or he's simply cutting straps from the belly area or maybe it's just a poor hide.

Share this post


Link to post
Share on other sites

This is true. I don't use belly so and forgot how they are. Thanks.

Share this post


Link to post
Share on other sites

0k So, belly is not good?

Share this post


Link to post
Share on other sites

0k So, belly is not good?

IT really depends on what you are doing with it. Belly wrinkles and stretchs a lot. for little items, things where stretch do not matter and for practice tooling and stitching. It's not normally used for things that need firmness. It is also a poor choice for things where it would be bad if it stretched. Like Belts and straps.

Michael.

Share this post


Link to post
Share on other sites

<<<snip>>>Belly wrinkles and stretches a lot.<<<snip>>>

Just like mine. ;-)

Bob Stelmack

Share this post


Link to post
Share on other sites

Just like mine. ;-)

Bob Stelmack

Mine too. I think its a sign of wisdom. It's certainly not caused by age.

Michael

Share this post


Link to post
Share on other sites

Definately a bac choice of leather. This is a piece of belly. There is no fixing what you see the belt will stretch and become useless. If you will take the belt in hand one end in the left hand and the other in the right hand and pull hard you will see what I mean. I took me a while to figure this out too.

English bridle works best for belts at least that is what I use.

Good luck.

Share this post


Link to post
Share on other sites

Vegtan works very well for belts. Just make sure its from the back. I buy Backs and Bends for belts. Works great. Herman Oak Leather is all I buy anymore.

Michael

Share this post


Link to post
Share on other sites

looks like the leather was rolled backwards. Flesh side out.

This was my first guess, as well.

When you roll it backwards tight enough, you'll end up stretching the grain side passed the point of being able easily to return to its original location. This can also happen on the flesh side, but it can take much more bending to get to that point and it's far less noticeable. As was mentioned above, the location of the hide that the particular piece was cut from plays a big role in the stretching/bending effects, too.

Share this post


Link to post
Share on other sites

Vegtan works very well for belts. Just make sure its from the back. I buy Backs and Bends for belts. Works great. Herman Oak Leather is all I buy anymore.

This is quite true...I'm finishing up a ranger belt for myself and cut it from bridle back outside (black) and the inner layer is chestnut veg tanned tooling leather, also from the back...and it's beautiful. Now I think I am spoiled and will only use bridle backs for other things I make. :) Maybe not, but wow, does it really burnish nicely!!! Just wonderful to work with. Mine came from Wickett & Craig, but I know Herman Oak makes great leather too.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...