Jump to content
eyehunter

Boy Scout Project

Recommended Posts

I am a very novice leather worker who has mainly worked on projects related to scouting. Our troop is in need of some axe head and saw blade covers. I was thinking about having the boys make them as opposed to purchasing. Any suggestions for simple patterns? I was also looking for suggestions on reasonable sites to purchase supplies?

Share this post


Link to post
Share on other sites

Hey there. I am working on similar for my Troop. I won't be able to get to pictures or sketches until next week at the earliest (Eagle project this weekend and I'm in the middle of packing up house for a move), but the Troop has some old axe sheaths (hopefully they didn't get tossed this past week when they cleaned the storeroom). I am hoping to be able to use those old sheaths to build new ones, with a few improvements to hopefully avoid what caused the originals to fail in the first place, based on what I have learned here. (I found I shouldn't using rivets to keep the blade from damaging the stitching--I should use a nice thick welt instead! That way the blade doesn't get dulled or damaged by metal-to-edge content. Not to mention on the old sheaths that failed, most of them tore and/or rotted around the rivets. Some of the axes had pitting from contact with the rivets too.)

This guy had a pretty good idea for one sheath, the second axe with the stud closure: http://leatherworker.net/forum/index.php?showtopic=24159&view=findpost&p=204808. I might replace the stud with a heavy duty snap and reinforced attachments, as teen boys tend to be rougher than norm on the gear, and I can see the hole wearing through. The first one might also work with a buckle or snap arrangement, for the same reason.

I'd like to make similar to this for the hatchets: http://leatherworker.net/forum/index.php?showtopic=33688&st=0&p=208874&hl=axe%20sheath&fromsearch=1entry208874, but since the blade angle is a little different at the cutting face, I'd make it more of a pocket for the cutting edge. If you notice on that example, the bottom edge is not sewn. I think I'd like to have at least a stitch or two at the bottom edge, with the sheath slightly over-sized to accommodate. The strap will hold the cover on and in place.

Rob Bennett, RMB Custom Leather on this site, has a great sheath for WWII axes on his website (http://www.allaboutpocketknives.com/knife_store/item799-26319.html). It's for a crash axe, so the sheath is short and has the bit for the spike. But the part I like is the double stitching.

Lastly, there is a tree-saw sheath here: http://leatherworker.net/forum/index.php?showtopic=34497&st=0&p=213834&hl=+axe%20+sheath&fromsearch=1entry213834

Share this post


Link to post
Share on other sites

Easiest cover for a bow saw is a length of old garden hose split down the length on one side.

23 years with Troop 252, Fairfield CA

Share this post


Link to post
Share on other sites

Thanks. We have used those in the past. I was looking for something a little nicer. Great dog picture btw!

Easiest cover for a bow saw is a length of old garden hose split down the length on one side.

23 years with Troop 252, Fairfield CA

Share this post


Link to post
Share on other sites

Here is a simple axe cover I have done:)

I also made some notes, there are a lot of axe cover designs out there, but this is just 1 easy one I have made.

Materials List for mine.

2 templates mirrored of each other 1/2" bigger than outline of the axe.

8 rivets

3 snaps

Tooling of your choice

hole punch

Lace and Lace needle...(just the way I did it)

If you make the template 1" bigger than the outline of the axe you could just rivet the surrounding edges and not lace them....But I like Lace:)

I hope this is easy enough, I was a scout back in the day:) So I did lots of fun stuff like this when I was young!

Good for yall to keep it alive!

Maybe the den fathers/mothers can get together one or 2 nights and make the templates and get everything mocked up so the kids can just put them together and have the fun part of it:)

post-28433-013856600 1328972745_thumb.jp

post-28433-012119300 1328972757_thumb.jp

post-28433-078822700 1328972766_thumb.jp

post-28433-097971500 1328972775_thumb.jp

post-28433-055118300 1328973230_thumb.jp

Edited by chancey77

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...