Jump to content
Rodeo Man

Looking For Sewing Machine N. Texas

Recommended Posts

Im wanting to buy a "heavy duty" sewing machine. I don't know what brand or style, I just want a good machine. I have always had a saddle maker do my sewing, which isn't that much. If you can just tell me what you have, Ill will research it. Thank you for your time.

Share this post


Link to post
Share on other sites

Im wanting to buy a "heavy duty" sewing machine. I don't know what brand or style, I just want a good machine. I have always had a saddle maker do my sewing, which isn't that much. If you can just tell me what you have, Ill will research it. Thank you for your time.

You need to define what thickness of leather you intend to sew and the size of thread you want to use. Saddle machines need to be at least 12 inches deep, on the right of the needle. Most saddlers here are using 16.5" cylinder arm machines, with triple feed. They sew with up to #415 thread. They are sold by Cowboy, Cobra, Techsew and others. Look at the banners on top and click on them to go to their websites.

I have a harness machine for sale, that sews up to 3/4 inch, with any thread, with 12 inches inside the post. But, I am in Michigan and it is being sold cash and carry.

Edited by Wizcrafts

Share this post


Link to post
Share on other sites

You need to define what thickness of leather you intend to sew and the size of thread you want to use. Saddle machines need to be at least 12 inches deep, on the right of the needle. Most saddlers here are using 16.5" cylinder arm machines, with triple feed. They sew with up to #415 thread. They are sold by Cowboy, Cobra, Techsew and others. Look at the banners on top and click on them to go to their websites.

I have a harness machine for sale, that sews up to 3/4 inch, with any thread, with 12 inches inside the post. But, I am in Michigan and it is being sold cash and carry.

I know I need one with a deep pocket, so i can push chaps through. I think if it could sew 3/4 inch it would be sufficient for me. I have no idea about thread size, can you tell me what would be ideal for chaps, and farrier leggings?

Share this post


Link to post
Share on other sites

I know I need one with a deep pocket, so i can push chaps through. I think if it could sew 3/4 inch it would be sufficient for me. I have no idea about thread size, can you tell me what would be ideal for chaps, and farrier leggings?

A harness stitcher like mine is of no use when sewing most chaps. Chap leather is just thick garment leather. You are probably not going to be using any thread larger than #138. Any industrial walking foot machine, whether flat bed or cylinder arm, can sew up to 3/8 inch thickness, using #138 bonded nylon thread.

Look for a good walking foot machine with a large bobbin and reverse lever. You will need to get one with a servo motor, or replace the clutch motor with a servo motor, to control the machine at slow speeds. It is easier to control the work on a flat bed machine, when it is large and flat, like chaps.

If you are looking to buy a new machine, a Consew 206RB-5 is a very good choice. The Chandler 406RB is its sister machine and costs a couple hundred less for basically the same machine. Both have a big bobbin and can sew 3/8 inch leather with #138 thread.

Share this post


Link to post
Share on other sites

Rodeo Man i would go ahead and get the bigger 16 inch arm machine. It will sew chaps and farriers aprons fine. I say that because that's what i have and have made several pair of chaps, chinks and farrier aprons with mine. The extra space makes it a lot easier to. On mine i use 277 thread on top and 207 on the bobbin for just about everthing i make. The 346 thread is to big IMO it looks like they were sewed with a piece of rope.

Edited by dirtclod

Share this post


Link to post
Share on other sites

Rodeoman;

Here is an example of a 16.5 inch cylinder arm leather stitcher. It has a bunch of accessories available, including a bolt on flat table. If you use a fairly small needle, say a number 22 or 23 (leather point), with #138 bonded nylon thread, it will sew chaps all day long. This type of machine sews over 3/4 inch thickness, with very thick thread (up to #415). It has large, cylinder shaped bobbins that hold a huge amount of thread.

Share this post


Link to post
Share on other sites

Wow this helps a ton, you guys are great help. Should I just get a new one or take a chance on a used one? Is there any particular parts to look at when buying a used machine?

Share this post


Link to post
Share on other sites

Hello..You could check with Panhandle Leather there in Amarillo.They carry used machines...Ken

Share this post


Link to post
Share on other sites

Wow this helps a ton, you guys are great help. Should I just get a new one or take a chance on a used one? Is there any particular parts to look at when buying a used machine?

If you buy a used machine privately, you will be responsible for all repairs and adjustments.

Most long time dealers will provide you with some degree of phone assistance on their used machines. All of our member-dealers warranty the new machines they sell and provide one-on-one phone or email support.

If you can afford to buy a new machine, from a reputable industrial sewing machine dealer, you'll be better off. This will be especially important to you as a first time sewer. You are bound to run into issues you can't solve on your own. It will be beneficial if you can phone the dealer and ask him how to get out of your jackpot, rather than posting a question on the public forum.

You outta read our Leather Sewing Machines forum. It gets really interesting there with some topics drawing all kinds of fireworks. There are members that frequent that section who have dozens of years of experience with industrial and leather sewing machines.

I applaud you for coming here with your questions, and not eBay.

Share this post


Link to post
Share on other sites

If you are in the Panhandle, theres a man names John Higdon in Amarillo that has a Chandler for sale. His Phone is 806-584-5099. I bought a 31-15 from him a year and a half ago, and every single problem i have ever had with it, hes been great to help. Even going as far as letting me bring it back to time etc. Super good guy.

Edited by B Milla

Share this post


Link to post
Share on other sites

Thank you Justken panhandle leather had a couple machines but both were out of my league.

Wizcrafts your knowledge amazes me, this website is great i could look at it for days. thank you again for all your help.

B Milla I was just a day to late John Higdon sold that chandler the day before. Super nice guy tho, thanks for that lead.

Thanks to everyone for your help

Share this post


Link to post
Share on other sites

Super nice guy and super to deal with. He trades a few machines so ya might keep his number handy. are you from up this way?

Share this post


Link to post
Share on other sites

I have not been up that way in a while, but Beck makes all of our boots. I live in Greenville, about an hour North East of Dallas.

Share this post


Link to post
Share on other sites

Bob Booth lives in Nocona, Tx and has a lot of used machines. Most anything you would need or want. He is an artist when it comes to rebuilding them, from awl and needle to walking foot machines. I've sent 2 people to him in the last few months and they were really satisfied. He is very reasonable on his prices and his repairs. I think bob is the rural post delivery and he and his son do this on the side. He is also a very good saddle man. I don't have his phone number handy but, I'm sure he is listed in Nocona. If you can't find his number I will try and post it later. Ronny

Share this post


Link to post
Share on other sites

Thank you Ronny I'll look him up and give him a call

Share this post


Link to post
Share on other sites

The injectors went out on my truck, so my sewing machine budget has taken a hit. I have found a Ferdco 847 for $600, can y'all tell me the pros and cons of this machine?

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×
×
  • Create New...