Jump to content

Jwalker

Members
  • Content Count

    63
  • Joined

  • Last visited

About Jwalker

  • Rank
    Member
  • Birthday 12/21/1971

Contact Methods

  • Website URL
    http://jwalkerleather.com/
  • ICQ
    0

Profile Information

  • Gender
    Male
  • Location
    DFW,Tx
  • Interests
    carving, tooling, and coloring functional leather art...due to a bad Harley crash 7/2/11 I'm back in school for software development...including building websites via hardcoding

Recent Profile Visitors

3,498 profile views
  1. I've been wayyyyy busy for a long time to take a breath n reply to some stuff here n there...if you go to Facebook n search for 'leather artisans digital guild' n ask the group, or 'masters of leather' yur post might get Peter's attention n of course thats his home turf...
  2. a dear friend, and uber master crafter..told me long ago that spirit dyes can be rejuvenated with isopropyl alcohol
  3. with all due respect, thronging chisels are meant only to penetrate the back side...they are only meant as a guide...meaning- just hittem hard enough to puncture the back side
  4. sounds thin to me...the slab i bought is 2"....the slab i was given by a custom granite guy is lil thicker...you could probly use this piece as long as its used on a SOLID surface...should make a nice 'thud' when used...heh..Peter M. tools on a piece of steel...students tool on the rock he started with- isn't even 1 sq ft..lol lotta headstone makers have great scraps free or cheap
  5. the mention of practice was in regard to practicing adding moisture vs. casing...i think the only way of truly testing for a finish to have already been applied would be to see if a drop of dye acts as it should...just 1 drop should tell ya....if it beads up at all & tries to roll around, its got somethin on it...hope I've been of some help
  6. with all due respect...you are aware of the difference between casing and adding moisture to leather, yes? kinda sounds to me though as if a finish of some grade has already been applied to this leather....acetone type fingernail polish remover MIGHT knock it off and render it toolable again, but don't hold yur breath...a bag of scrap from TLF is cheap enough to try some adding moisture vs casing...and some stamping practice as well as swivel knife practice....if ya wanna keep that blade sharp (of COURSE you do!)...get at least a small piece of white jewelers rouge...rub it well, i mean REALLY well onto a side of some heavy card paper (like a beer box)...hold the swivel knife blade equal to the angle of the blade...with some pressure, rub yur blade the length of the card...but only go the 1 way with it...try to do both sides an equal number of times...when should you strop the blade? every time you pick up the knife or feel the blade start do drag through the leather.....why use heavy card to make a strop? because leather will compress, and end up rounding the blade edge...the card is less likely to do that.
  7. same way Peter Main taught me to trace my pattern...but if it gets the paper wet, the leather isn't ready yet
  8. Tandy does some classes...and there are several groups on Facebook that are a hUge help
  9. if yur not a Facebook hater...try the international internet leather guild...there are several fb groups all about leather
  10. class 4 is the best bang fer the buck...if yur ready to pull the trigger...ya might try to find 1 used in yur area...otherwise...pucker up...the shipping is disgusting....course, it takes helluva stout fella to move all of its weight alone...which is made easier via the shipping method...verrrrrry sharp team behind the equipment, and they don't mind calls fer help
  11. never realized how lucky i'd be to have the mallet that i do...rawhide...green stripe on the handle...16 oz i think...was told by dear friend Peter Main to cut 3" off the handle, and then choke up on it...i dunno how some folks can use a maul...i really like my mallet..lol i dunno what yur using under the stamp, butcha shouldn't have to hit stuff all that hard...i got a nice piece of scrap of granite from a granite guy...then i have my marble from Tandy with the pound-o-board on 1 side..been using that piece for bout 18 yrs now
  12. what a nice thing to say!! thx man! we enjoy folks jus like you...and it sounds like the bug REALLY bit ya...lol...it is indeed a love & passion...NOT cheap to get into...most of us feel its only fair to share whats been shared with US...its people inquiring, ordering, and telling me my stuff looks real nice, keep driving me to do better work & get nicer results....it definitely requires practice...to start off with, i'd getta Barry King swivel knife with a straight blade...the bearings he uses make a huge diff...especially when the leather is properly prepared....there's also several leather groups on Facebook...from tools to patterns and help & advice...and its a global network...lots of artists there that don't come to this group due to time ect....
  13. depending on the project and its intended use...lotsa times i use neutral shoe polish to finish...doesnt darken natural leather much right away...takes some use/ time...buffing it real well when you apply it, it produces a nice gloss and will darken to look even better over time...however...if you've got a lotta carving/ tooling, be prepared to get extra shoe polish outta the deeper cuts and impressions ( took me a while to find soft bristle brushes to do it with)
  14. Tandy's leather weld would fit yur needs to, so you could just GLUE a liner to it
×
×
  • Create New...