Jump to content

4wheeler4

Members
  • Content Count

    41
  • Joined

  • Last visited

About 4wheeler4

  • Rank
    Member

Profile Information

  • Gender
    Male
  • Location
    Henderson, Nevada
  • Interests
    Firearms, 4 wheeling, leather, desert exploring

LW Info

  • Leatherwork Specialty
    just learning
  • Interested in learning about
    holsters, sheaths, landscapes

Recent Profile Visitors

1,712 profile views
  1. Ray, Received my order yesterday and they easily pentrated 1/4 inch leather and still rolled over the washer. Thanks again for the heads up. Ric
  2. Ray, Great to hear they are what you needed, I tried calling today but got the answering machines so they probably have the weekend off. I will send them an email and go from there. Thank you sir. Best wishes, Ric
  3. Raysouth, That is the size I am looking for. I will call them on the 26th. Thank you very much!!! Merry Christmas to you.
  4. Thanks Trevor, I am searching their site now!!!!
  5. Trevor, I would love the name of the company, I could put those to use. Thanks very much for all the great photos. Your time is appreciated
  6. If you ever remember it, please post it as I am still searching.
  7. Thanks Geneva, Those grommets do not have the length under flange to consistently go through 1/4" material. Thanks for your input
  8. Hi Ramrod, Thanks for the response, I have tried several packages of the long shank from Tandy. The shank is 1/4 " but it is not 1/4" under the flange. Skiving around the hole is not applicable in this circumstance. I thank you for the info sir!!!
  9. Ray, Thanks for your response. Ohio Travel Bag was one of the first stops that I made as they have delivered unusual finds for me in the past. The leather belts are 1/4 inch thick and the customer wants grommets or eyelets that will go all the way through.. They will not compromise on the belt thickness so I am still searching for a better solution. Best wishes!!!
  10. Thank you Chain, I will keep my eyes open when I am out in those type of shops. Thanks for your advice!
  11. Thank you crazyjz, that works both ways. I will pass you any info that I run across. Thanks for the input! Thanks Itch, I have used that approach on several occasions but sometimes the project just won't allow me to. I appreciate your input! I did the two eyelets end to end once but it ended up breaking and fortunately it was on a piece for myself. We may have to go to China for a group buy of ten gazilllion and sell to everyone else!!!!!
  12. Hello everyone, I am searching for some 3/16" antique brass grommets that will penetrate 1/4" leather and still have room to roll over the lip on the flange. I think the characteristic is called length under flange (luf) of at least 1/4". Any help will be appreciated.
  13. Josh, You know I love that pattern as I "borrowed" it from you last year, It was the first one that I did, and hangs proudly on my side. Thanks again for sharing and being an inspiration to us beginners!!!!
×
×
  • Create New...