Jump to content

Ben

Members
  • Content Count

    22
  • Joined

  • Last visited

About Ben

  • Rank
    Member

Contact Methods

  • Website URL
    http://
  • ICQ
    0

Profile Information

  • Gender
    Male
  • Location
    Cheyenne, WY
  • Interests
    Riding my horse as much as possible. Building western saddles.

LW Info

  • Interested in learning about
    As much as possible about saddlery

Recent Profile Visitors

3,483 profile views
  1. Tom, This is a good opportunity for you to add some leather to the ground seat and see/feel the difference. If you don't like it take it out and start over. I think you should use your imagination, and just jump in here. If you have a saddle that you like see if you can duplicate the seat. Building a ground seat from a metal stainer or an all leather ground seat is completely different but here you can get some experience with leather placement, skiving, and feel. Ben
  2. Cowboy B,ill I use a tubing cutter to cut the 3" spacer down to 2 5/8" . Once the bolt is tightened down cut off with a hacksaw and peen with hammer. Ben
  3. bjr Here is a link on this forum discussing setting the rigging so that is is correct once the completed saddle sits on the horse. http://leatherworker...h=1 You have to scroll up to get to the beginning of discussion. Ben
  4. jdwintx I made a jig to shape the gussets for a saddle bag I made. The gusset is 4/5 oz lining leather. I wet the gusset , formed it around the jig, put plywood backers on front and back and clamped the edges till dry. I took the plywood backers off and glued the panels one at a time. Pulled out the jig and hand sewed but seems a machine would work at this point. Hope this gives you more ideas. Ben
  5. When I built my 3rd saddle I lined it with 1" bark tanned shearling from Bowden. I completed it and started riding it in the middle of March. The shearling was packed down the middle of June. I put on 300-400 miles of trail riding and I think that would correspond to around 100 hours of riding. Ben
  6. Lonnie, Great looking saddle. Lots of really paying attention to detail. Ben
  7. Lonnie, I think that if you block your skirt in the rear such that the rear jock lays down on it the entire assembly will follow the rock of the bars which will in turn follow the back of the horse. Here are a few pictures that might help in the discussion. Ben
  8. Lonnie, I have only made a few saddles but here goes. You want to block the rear of your skirt such that when you install your rear jockeys they cover the rear bars, tugs, and lay down nicely on the skirt. If you do not have enough rise you will have a space between your skirt and rear jockey. This space is not pleasing to the eye and also leaves an avenue where stuff can get up under the jockey. Ben
  9. Clay, A couple of thoughts. I think the wool liner's primary purpose is ensure the saddle stays in place on the horses back once the saddle lays in the natural place it is destined to be per the horse's conformation. Secondary function is to provide a little padding. If you friend is not adjusting the saddle every run and the horse tells him the latigo liner works, then either this horse is an exception or maybe we are learning something new here. Like many things this is probably only new to us at this particular time. Ben
  10. Seveneves, Here is a picture of how I did it. I skived the rigging extension coming around under the gullet down to zero, glued, and sewed. The inside stitch is the rigging to the skirt. The outside stitch is the sheep skin and the rigging sewn to the skirt. Ben
  11. Horsegirl, Making adjustments to the bottom of a tree is not a good idea, it is like sticking your finger into a balloon, it affects the rest of the aspects of the tree. I am thinking you will be better off to try some different padding. Has you horse lost weight and the withers are more narrow? Some pictures would be helpful. Ben I
  12. Ben

    Angled Stirrups

    mwcondit, Try this website: http://www.saddletre...roduct_list&c=1 Ben
  13. Alan, Looks clean and sharp. Great work. Ben
  14. Mike, Your picture is how I made the inskirt rig for a trail saddle I built. It worked very well. Jon Watsabaugh was my inspiration. He has posted on inskirt rigging here on the forum. Here are some links. http://leatherworker...?showtopic=1235 http://leatherworker...showtopic=18136 Ben
  15. Billy, After I field tested my first saddle I had to go back and reshape the ground seat. If you check some of the previous posts most rookies do not carve enough out of the ground seat. Mine was to high in the front and not leveled off enough in the rear. I had ridden it a year before I bit the bullet and redid it. I soaked the seat with water as much as possible, even though I had oiled with neats foot oil, to soften up the leather. This helped to keep from getting that cracked look all over as you pry it off. My contact cement job turned out more than adequite. I used thin nails to line up my cantle stitch holes as I put it back together and was able to sew everything through the same holes. I plugged the the fork screw holes in the tree with carved pine sticks and glue, used the same hole through the seat. I used the same latigo string holes. If the adjustment is only needed in the front you maybe able to just roll the seat back tie it up and carve out what you need. Might as well figure it's a used repaired saddle after you get done. My rides much nicer now and was well worth doing over. Ben
×
×
  • Create New...