Jump to content

phlegmaticdog

Members
  • Content Count

    47
  • Joined

  • Last visited

About phlegmaticdog

  • Rank
    Member
  • Birthday July 9

Contact Methods

  • Website URL
    http://
  • ICQ
    0

Profile Information

  • Gender
    Male
  • Location
    Lakewood, Colorado
  • Interests
    Playing the piano, hiking with my Labrador Retriever Magnus,gardening, photography

LW Info

  • Leatherwork Specialty
    wallets, notebooks, belts, dog collars, backpacks,etc.
  • Interested in learning about
    everything
  1. As mentioned before by Leatheroo, X-ray film is a great medium for designing and saving patterns. It is strong, yet flexible and easy to cut. Since it's thick plastic it lasts virtually forever. About half of each sheet is transparent which facilitates tracing. Hospital X-ray departments throw away many sheets every day during start-up and calibration of the machines. If you have a friend in the medical field they can make inquiries, If not, a few kind words to an xray technician will enlist him/her to your cause. (you might even make a key fob in exchange and have a friend for life).
  2. Beautifuil workmanship and some innovative design ideas! Beautiful photographs, too.
  3. Beautiful work, Tim. Do you buy the ring mechanism separately or tear apart a finished notebook to get it? --Dave
  4. A friend has requested a couple of lanyards (those straps you've seen people wear around their necks) to hold her ID and credentials. She wants them dyed black. Of course, I don't want the black dye to rub off on her clothing so I need to seal the lanyard and probably waterproof it as well. What finishing product(s) would you guys/gals recommend? She says she also occasionally wraps the lanyard around her credentials to carry in her purse, so the lanyard must be flexible as well. I'm using a light 4/5 leather. Thanks, Dave
  5. That's really nice. Are you planning to do a matching set?
  6. Thanks for all the nice comments. I used eco-flo saddle tan hi-lite diluted 1:1 with water and gave the leather a heavy coat until it had taken just about all it would absorb (thus no blotches). After it dried, I put on a coat of RTC and finally a coat of Fiebings antique saddle tan.
  7. My wife wanted a handbag to carry her knitting supplies, and several months later, Voila!
  8. I agree with Ray. I'd want to keep them on display behind glass for fear of scratching them! Seriously though, these are truly beautiful. Dave M
  9. Beautiful work and very unique. Any chance you could show a photo of the carved leather before you wrap it around the template on a future project? Thanks, Dave
  10. Nice work. Good job on the hand stitching! Dave
  11. I make 3 or 4 different dilutions of the dye mixed with water; 1:10, 1:5, 1:2, full strength, etc. After dipping the brush in the least intense color (1:10), I brush it onto a paper towel until the brush is almost dry, then use that brush to color the entire rose. Since the brush doesn't have much paint on it, it takes several repetitions to achieve the desired color but by selectively adding layers where you want the color to be most intense--such as at the centers of the rose petals--you have a lot of control over the gradient of color and can get a much more appealing 3D appearance. Then change to the dilution one step higher and repeat the process, but only in the areas where you want more color. Repeat again with the next dilution. Finally you can use undiluted dye in a very few select areas but don't overdo it. In a few areas where I want to give the illusion of reflected light I add a few drops of cova white to the most dilute mixture and --again, using a very dry brush-- touch-up a few spots on the outer edges of the petals. The same process is used on the leaves but I don't use as many different dilutions since there isn't as much detail to complement. This dry-brush method takes some extra time, but the results can be very nice.
×
×
  • Create New...