Jump to content

Flask

Members
  • Content Count

    14
  • Joined

  • Last visited

About Flask

  • Rank
    Member
  1. When you are wet forming a knife sheath, can you dye it and Tan Kote it first, before wetting? Thanks
  2. Thanks for the pointers guys, much appreciated.
  3. I am happy with the way it turned out, but the knife is a little harder to pull out then I would like. I wet formed it then baked it in the oven. I did have a spacer in it, but, how can I now get the knife a bit loser in there?
  4. Anyone that can make one of these in an hour is a much better man then me.
  5. Hi all I am able to put a good edge on my knives using sand paper (emery cloth), and finishing with a strop, but looking for a faster (easier) way and thinking of buying a buffing wheel, wondering if this is a good idea, and if people here use one to put or keep that razor edge on their knives? Thanks
  6. I like a neck knife, and you did a very nice job there. Gives me some ideas. Thanks for sharing.
  7. Thanks for the advice, and taking the time to respond, much appreciated. Flask
  8. My favourite belt is an 1 1/2" leather belt, I have been wearing it almost daily for 20 years or more. After so long I guess you may be able to picture what it looks like. I am wondering how I can restore it to make it look closer to what it looked like when I bought it. What about taking a sanding block to it and sanding it down to the original leather and starting all over? Is there some kind of chemical that I could wipe on it that would clean it? Thanks for any help and suggestions. Flask
  9. Thanks for the reply guys, all very helpful, I do appreciate it. Flask
  10. Trying to order some buckles and belt blanks for my first project, and in the ordering I came across this: Length of Buckle End SkivingSo my question is , what the heck is this, and how long would l want it? Thanks in advance. Flask
×
×
  • Create New...