wayner123 Report post Posted April 2, 2013 Hey all, I am going about my first holster and I really like the idea this guy has in the picture below. But I am not sure what it's called, or what exactly it is. If you can help me out I would greatly appreciate it. Quote Share this post Link to post Share on other sites
Frank Report post Posted April 2, 2013 They are called tensioners Quote Share this post Link to post Share on other sites
dustinking Report post Posted April 2, 2013 Its ushally just a little piece of fuel hose Quote Share this post Link to post Share on other sites
Craig44 Report post Posted April 2, 2013 Yep, it should have a screw in it to adjust tension. Quote Share this post Link to post Share on other sites
wayner123 Report post Posted April 2, 2013 Thanks so much. Now to go find some... Quote Share this post Link to post Share on other sites
camano ridge Report post Posted April 2, 2013 You can find everything you need . Basically fuel hose cut to your length, cup washer, t-nut and screw. However if you are not sure of yourself you can buy everything you need from these people the first time so you can see what to buy. http://oldfaithfulholsters.com/shop/hardware-replacement-pack/ Quote Share this post Link to post Share on other sites
Matt Alsaker Report post Posted April 2, 2013 I use black oxide Chicago screws with a piece of fuel line. I went to several different automotive and hardware stores before I found a fuel line I liked. The first couple I bought were to rigid. Fuel line is sold by the foot for about $1.25 depending on the store. Quote Share this post Link to post Share on other sites
