Leela Valley Leather Report post Posted May 20, 2013 Hello good people, I've had a request for an apron from a friend of a friend. He has stipulated that the apron will be used at both a timber mill and a foundry. The problem I face is finding the right type of leather. Neither the customer or my self are overly concerned about the conditions at the mill, it is what the apron will face when used at the foundry (I assume it is a small semi-commercial set up). While the usual chrome tan apron split will be OK at the mill the customer wants something more durable for the conditions at the foundry. I believe that a chrome tan leather would be more durable than a veg tan given the conditions, but I then have concerns over the conditioning (neatsfoot oil etc.) of chrome tan over veg tan. Any and all suggestions are welcome on type of leather and method of finishing. Cheers Andrew Quote Share this post Link to post Share on other sites
rickybobby Report post Posted May 20, 2013 You may consider an Oil Tan hide. I think would have the durability needed for the foundry. Do not confuse some of the "oil tan" sides that Tandy has. I have seen some that do not have the characteristics you are looking for. What to look for, the leather has a "Pull up" color change when bent, scratch marks will rub out with your hand, it will look like it is "oiled" when new. I would think a heavy side would be best, maybe 6/7 oz. There are several dealers that carry this, call around and ask for samples to be sent. Quote Share this post Link to post Share on other sites
