Jump to content

Recommended Posts

Playing around with some ideas...one piece of leather , 2 card pockets ... one on the inside and one on the outside for most used card...bills fit nicely without the need to fold them. I might go with 2 stacked pockets on the inside. For this one I used 4-5oz chrome tanned , stitched with #138 on a Cowboy CB4500

Any comments are more then welcome.

Thank you !

post-21349-0-33460200-1430972196_thumb.j

post-21349-0-05694200-1430972197_thumb.j

post-21349-0-40574100-1430972202_thumb.j

Share this post


Link to post
Share on other sites

I love this. Awesome design. I'm probably going to steal it. I hope you aren't offended.

Share this post


Link to post
Share on other sites

I love this. Awesome design. I'm probably going to steal it. I hope you aren't offended.

Joe...go ahead brother !!!...lol...I am gonna post a picture of the main part of the wallet unfolded soon as I have a chance , just to give you a better idea

Share this post


Link to post
Share on other sites

Nice wallet design. I have a prototype I was playing around with that is very similar to this. I love the card pocket feature on yours. Mine just have a card slot on the front that can hold maybe 5 cards and a wad of cash in the back, but I love your idea of the card pocket on the back as well which will allow a few more cards.

Karina

post-32363-0-91359600-1430995985_thumb.j post-32363-0-47616200-1430996012_thumb.j post-32363-0-54231600-1430996027_thumb.j

Share this post


Link to post
Share on other sites

Very nice. One thing you might want to try; The back of the snap detracts a little from the appearance, you can use the button on both sides with the male on one and the female on the other, then both snap pieces look finished on the outside of the wallet. The posts are the same for the male and female snaps so they are interchangable. I would use the domed cap on both sides.

Chief

Share this post


Link to post
Share on other sites

Cool design!

Share this post


Link to post
Share on other sites

Very nice. One thing you might want to try; The back of the snap detracts a little from the appearance, you can use the button on both sides with the male on one and the female on the other, then both snap pieces look finished on the outside of the wallet. The posts are the same for the male and female snaps so they are interchangable. I would use the domed cap on both sides.

Chief

Thanks Chief...I am gonna give it a shot for sure. I made few wallets where I actually went the other way around using the flat back of the snap on both sides ...I just needed that low profile sandwiched in-between two plys of leather

Share this post


Link to post
Share on other sites

Well Legion your wallet is way cool. I really like it. And CHIEF I didn't know that about the interchangeable posts so thank you. Will try that where the snap has to show. Cheryl

Share this post


Link to post
Share on other sites

For those of you interested here is wallet unfolded

post-21349-0-20774700-1431108028_thumb.j

Share this post


Link to post
Share on other sites

thanks

Share this post


Link to post
Share on other sites

Here is a smaller version with an extra pocket inside the flap and the other ones facing inwards . I also took Chief's advice and use the domed part of the line #24 snap on both sides

post-21349-0-90200900-1432557343_thumb.j

post-21349-0-69020100-1432557344_thumb.j

post-21349-0-25194300-1432557345_thumb.j

post-21349-0-07812800-1432557353_thumb.j

Edited by LeatherLegion

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...