Jump to content

IngleGunLeather

Contributing Member
  • Content Count

    512
  • Joined

  • Last visited

2 Followers

About IngleGunLeather

  • Rank
    Leatherworker
  • Birthday 02/11/1974

Contact Methods

  • ICQ
    JasonIngle

Profile Information

  • Gender
    Male
  • Location
    Jacksonville, NC

LW Info

  • Leatherwork Specialty
    holsters/belts/western rigs
  • Interested in learning about
    holsters, sheaths, belts, motorcycle gear
  • How did you find leatherworker.net?
    google

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. This is airbrushed H.O. yeah, noticed that as well. Could be the thickness of leather and the shoulder of the punch. I punch through both layers. Hindsight, I should've Puch the outer layer before glueing them together. Thank you
  2. Thank you. Not really. Mostly everything I do is 2 layers of 7/8. It's dialed in pretty good some threads vary too and adjustments need to be made.
  3. Thank you. Yes. Thank you! Thank you! Thank you and you can! Thank you!
  4. Been a while since I completed a belt. Don't advertise them like I used to. But I took this order on for a repeat customer. This belt is 2 layers of 7/8 ounce Hermann Oak.
  5. Make your liner 1/4 inch wider on each side. Trace your outer layer on to the flesh side of the liner. Apply glue to both flesh sides. Lay outer layer in the traced area. Stitch after glue has cured. Cut away excess material. Sand, bevel, burnish, finish.
  6. Thank you Thank you. Went all the way through with this one. I've got some hardware ordered that I hope will allow me to sammich them next time. On this one I went with what I had on hand.
  7. Hi Jeff. Thank you. This one is dyed with Fiebing's Pro mahogany, non diluted.
  8. Thank you. Molded on the backside. It's a very snug fit. Lol, that's a rattle canned blue gun. Hopefully the customer will send a picture with his pistol in it.
  9. First time making one of these. Made from 7/8 ounce Wickett and Craig veg tan. Machine sewn. Pull the Dot snaps.
×
×
  • Create New...