Jump to content

jbradford

Members
  • Content Count

    23
  • Joined

  • Last visited

About jbradford

  • Rank
    Member

Contact Methods

  • Website URL
    http://
  • ICQ
    0

Profile Information

  • Gender
    Male
  • Location
    Texas
  • Interests
    I'm a career firefighter. Live in the country. Horses. Teenage sons! Lovely wife is a teacher/coach.

LW Info

  • Leatherwork Specialty
    Not yet
  • Interested in learning about
    cowboy gear
  • How did you find leatherworker.net?
    google

Recent Profile Visitors

4,826 profile views
  1. I've been making a few of these for family and friends. Any suggestions or improvements appreciated. Thanks!
  2. Nice clean look. Good idea using the roller buckle also!
  3. Very helpful information and I really appreciate your sincere comments. Your description of what started your sewing machine quest sounds very familiar to where I am at this moment. It is a difficult decision for some reason.
  4. I know this is an older post, but it's new to me. I REALLY like the flip flops! I'm going to have to try to make a pair now. I never would of thought of it. Great idea! How are they holding up?
  5. I like 'em! Nice, sturdy and well designed.
  6. Well, I'm obviously still fairly new at this. This is about the 5th memo pad I've made. It is sized to fit in shirt front pockets. Sometimes I carry mine in the back pocket of my jeans. PLEASE give me any tips/tricks to help me make these better. Thank you! Also, you won't hurt my feelings. I take constructive criticism very well and I'm soliciting it.... Thanks again! I hand sewed the leather by using a 3 prong chisel. I've read advice on finishing edges by Bob Park (excellent article) and tried to follow it. I used a light coat of conditioner, antiqued it, applied black edge coat, and followed with two coats of Acrylic Resolene. The edge coat must not have dried long enough because the acrylic resolene picked some of it up and streaked the acrylic finish some. Kinda made it a little "punchy" looking though and it's ok for this piece. I would not want it to happen again though.
  7. Thank you for your replies! If I put on (or have one put on) a servo motor w/ built in speed reducer, do you guys think this would be a machine that is capable of working well? I do not do production type work, but would like to be able to sew medium weight leather on the things I make. So far, it has mostly been notebook covers and a few knife sheaths. I know it depends on the thickness of the leather I'm sewing. Mostly so far has been around 6-8 oz w/ 3-4 oz backing. I did just make some suspenders that is 8-9 oz with a 5-6 oz backing. It's pretty thick, but I would probably use a little lighter weight leather on the next ones. There is adequate room under the "foot" for the leather to fit. I'm not sure if I can use a thick enough needle and thread to work well. The needles that came with this machine are DB x 95, 16x95, #22 (140). I'm not really sure what that all means (sorry!), or what size thread they accomodate. It has been suggested that if I could get it set up to sew up to 209 (?) thread, I would be happy to have that capability. Ideally, I would like to be able to sew up some custom breast collars for my saddles, but I understand that probably requires a true harness type stitcher. I guess my main concern is whether or not it is worth it to invest a couple of hundred dollars in this Consew 290. Thank you very much for your help!
  8. Howdy. I ran across an older Consew 290 industrial machine that currently has a 3 phase motor. I have not sewn with a machine before. The machine appears to be in very good shape. If I spend $100 for the machine/table, would it be cost effective to put a 110 motor on it, with a speed reducer? I have been informed the motor, install, set up and reducer would be in the $250 neighborhood. Soooo, I would have around $350 in the rig. Any advice will be appreciated. Also, would the mod's make this machine suitable for sewing up to a 8-9 oz thickness? Again, I'm new to sewing, so use small words and type very slowly! Thanks, Jim
  9. jbradford

    Tapadero Lamp

    I'm almost speachless at the quality of your work. Absolutely amazing! Your work is an inspiration to me! I mean that very sincerely.
  10. Very nice work. I've seen a lot of 'em. Your's is outstanding.
  11. Absolutely beautiful work! Your quality shows.
  12. I like it a lot! I think the look is very nice. The distressed finish really makes it. Great job!
  13. I'm a beginner and learning. Very serious about making it right. This is the 3rd leather tally book I've made, but the first one I've tried to put any type of "finish" on. Some things I feel like I've learned and would appreciate any advice on you care to offer. It would be very beneficial to me. It's difficult to lay out a pattern and have it come out exact. Since this pattern involves basically working inside a box, the barbed wire hasn't come out exact yet. I've about decided I'm laying it out backwards. I've been cutting in the double lines, and then tooling everything inside "the box". You can see the barb wire did not lay out perfectly. Maybe I need to work from the center and then out? Then the double cut line would just wind up where ever it needs to be? Not sure if I'm describing this well. I oiled with neatsfoot, then a coat of conditioner, then two coats of Bee Natural Leathercare "RTC" Sheridan Resist & Finish, then some paste antique. Letting the antique dry and then plan on a couple of coats of Fiebing's Acrylic Resolene to protect it all. Is this about right? I burnished the edges using some beeswax and then put on some edge dye. This doesn't seem to be correct cuz the edge coat is beading up due to the wax. What is correct? Also, the stitching absolutely kicks by b***. I've been using a 3 prong punch. I'm using needles that have sharpened edges along with wax thread. It literally takes me about an hour and a half to sew up both sides. Appreciate your help! Jim
  14. Very, very nice! Everything about it looks professional. How long to do the braid?
×
×
  • Create New...