Halitech Report post Posted October 27, 2013 I started with an idea in my head and 2 different pieces of leather (18"x18") that I thought complimented each other for colors and ended up with this. Special thanks to the staff at Tandy Leather for the idea on the handle idea Quote Share this post Link to post Share on other sites
J Hayes Report post Posted October 30, 2013 Nicely done. How did you go about sewing the bottom? It looks "boxed" or flat. Quote Share this post Link to post Share on other sites
Halitech Report post Posted October 30, 2013 that part I did with a machine but basically I overlapped the 2 pieces I was using for the front and back and cut it so the extra would fold in on itself to give it a flat bottom and more support on the bottom. Quote Share this post Link to post Share on other sites
J Hayes Report post Posted October 30, 2013 I like it. The flat bottom is nice. How did you do the sidez then. Quote Share this post Link to post Share on other sites
Halitech Report post Posted October 30, 2013 almost the same way. I glued everything first and then sewed it. if you were to take a piece of paper, lay it landscape and cut 2 slits 2" each from the bottom and the edges, to the top you would have the only cuts I made until I did the flap. Quote Share this post Link to post Share on other sites
