cdthayer Report post Posted August 28, 2009 I came up with a stripped Durkopp Adler K205 990017-370 hull/parts machine that may have a few parts still useable on it. The handwheel, face plate, and most of the hook assembly are missing, and it is rusted up badly from lying outside in the weather for several years. There may not be anything to salvage on it, but who knows? I've doused it with sewing machine oil since taking the photos, to help loosen it up for parts removal, and will give it another shot of oil from time to time and let it soak. I'll sell parts off of it, or the whole thing as one piece. I'll take $50 for the whole thing, but no shipping, pick-up only. I'll ship parts, if they're any good after I get them off. Like I say, it's a basket case, so it'll take a lot of work and money to try getting it to sew again, and I'm not sure that wasn't irreparable when it was last touched. It came out of a local factory, was sold at auction, and was acquired by a local Salvage Dealer. As-is, no guarantees. CD Quote Share this post Link to post Share on other sites
cdthayer Report post Posted January 15, 2010 I came up with a stripped Durkopp Adler K205 990017-370 hull/parts machine that may have a few parts still useable on it.... Some of the parts shown in the photographs are no longer with the machine. They're the parts circled in red on this attached photo. CD in Oklahoma thayerrags.com Quote Share this post Link to post Share on other sites
