Jump to content

leatherworklee

Members
  • Content Count

    50
  • Joined

  • Last visited

About leatherworklee

  • Rank
    Member
  • Birthday 05/29/1949

Contact Methods

  • MSN
    leenikim@msn.com
  • Website URL
    http://
  • ICQ
    0
  • Yahoo
    leatherworklee

Profile Information

  • Gender
    Male
  • Location
    Southeast Idaho
  • Interests
    Leatherwork and dirt track racing

LW Info

  • Leatherwork Specialty
    figure carving personal items
  • Interested in learning about
    any or all leather related knowledge

Recent Profile Visitors

4,464 profile views
  1. What material do you use to finish the seat after the tooled portion? In other words what do you sew onto the tooled parts to complete the seat. Vinyl? Lamb skin? chap and upholstery sides? Thanks for sharing. I am about to start my third seat. The first I covered the whole seat with the tooling leather. The second one used nagahyde. The next is a Corbin single seat and the customer wants and is willing to pay for top quality material.
  2. I did the leather work for this clock and my nephew did the wood work. There are twelve pieces of mahogany wood in the frame. The face is cut from 9/10 ounce Wickett and Craig leather. The family tree is my Mother's 5 brothers and 5 sisters and my maternal Grand parents. This will be auctioned off as a fund raiser at a family reunion next month. I spent quite some time hunting for the pattern for the tree and realized later that it nearly identical o a tree in our back yard. The largest numeral stamps that I have are 1/2 inch and did not look right on the clock face. While looking for on-line numbers to download, print and transfer using tracing film I noticed a site for patterns for roman numerals. Light bulb goes on, I have I's, V's, and X's in many different sizes. I used Fiebings spirit dyes. and finished with a rub of Carnuba wax on the face and a light coat of neatsfoot oil on the back.
  3. I have an old drill press minus the motor that I bought for $15.00 that works quite well. The most important things to consider are: Is your leather properly cased? Review casing procedures elsewhere on this site. And do you have a good solid surface under your leather? A good marble or granite block makes a big difference. Placing the tooling block on a really solid bench helps to eliminate a lot of bounce. I often use a "Hefty Handle" as well. I was having problems with bounce after moving my shop and found that making an extra leg for the table that I was using for a tooling bench really helped. I used a piece of 4X4 located directly under my marble block.I Hope this ramble helps.
  4. Thumb and finger kind of like a cell phone. They are not much bigger than that.
  5. A customer ordered two of these holsters. The weapon is a Ruger LCP .380 Automatic. I should have placed a coin in the photo for scale. These are small enough to be concealed in the palm of my hand. They are both hand sewn with a saddle stitch. The darker one is finished with Med-Brown Gel Antique and carnuba Wax the lighter one with Leather Glow and carnuba. The customer gave me a nylon "pocket Holster" that I tried to use as a pattern but ended up going back to basics with a pencil and a piece of paper to make the cutting pattern.
  6. Thanks for all of the suggestions. I made a round of the local welding/ Blacksmith shops today and bought an old but working drill press for $10.00 It doesn't have along enough throw for the work they do so they had replaced it with a bigger newer model. it should work great for what I need. Thanks again, Lee
  7. I would like to have a hand press of some kind or other but do not feel like i can justify the cost of a new one. Has anyone ever built one or modified something else ( C-Clamp, pony clamp etc.) to use? I use a lot of 2-D and 3-D stamps and alphabets but sometimes have problems with "bounce" or double images. Any Ideas? Thanks Lee
  8. Thanks Guy's now that you have named it I remember seeing them used but that was a long time ago and in a world far away. Thanks again.
  9. This item was given to my nephew by a member of the Shoshone-Bannock tribe on the Fort Hall Reservation in Idaho. It is about the size of a man's hand. It looks to have been crome plated and I can find no markings, numbers, names etc. The spring loaded rachet has three notches and hold the device from opening farther than set. The inside surface of each arm is smooth so probably not for gripping. There is a fairly substantial stud on the outside of each arm that might have held a heavy leather strap. The existing strap is fastened with a single piece split rivet. Does anyone have any idea what it might be? Thanks for looking Lee
  10. Dear Friends. This knife was part of a E-BAY purchase of leather tools. Have no idea what is was used for. The only sharpenend portion of the blade is on the "U" shaped end of the "L" shaped blade. Blade folds into the handle but creates a triangle shape almost to large to fit into a pocket. Contact leatherworklee@yahoo.com
  11. Friends. I need to find someone who can replace a broken blade in a horsemans folding pocket knife. It has 5 blades .... Hoof Pick, Leather punch, Mane/tail thinning blade, L shaped hoof pick and the main straight cutting blade is broken. Contact leatherworklee@yahoo.com
  12. I find the W&C to have a bit softer "Hand" and is easier to work with than the HO. Both are excellent products but the W&C feels better and tools slightly better. Then there is the 10 side minimum order with HO. Lee
  13. My brother is 5 years older than I and came home from Junior High school with a flyer for adult education night classes. It offered a class in leather craft. I was 8 or 9 at the time. Our father bought us a set of tools and practice projects. (I still have a cowboy boot shaped keychain that I tooled with my name etc.) I took a couple of semesters of Craft shop in Junior High that included Plastics, clay modeling and Leather. we added a few tools here and there up until about 1965. A lot of life happened and in 1978 we got into the purebred sheep business. My father had given me a personalized belt for christmas in 1967 and it had pretty well worn out by 1988. I needed a new belt and wanted one with sheep on it. A leather shop in Wyoming wanted $90.00 or more depending on the amount of detail involved. I called my brother and asked about our leather tools he did not know where they were ( He found them and gave them to me for christmas about 4 years later. Meanwhile I went to the Tandy store in Idaho Falls Idaho and bought the deluxe "Professional" leathercraft set which included the Pro leatherworkers tool set for $150.00 I believe that now a similar set sells for around 1300 dollars. My wife had been doing craft shows/ sales for several years with her Crocheted animals etc. I really needed a creative outlet and as I can barely write my name on paper I was amazed to find that leather just worked for me. I have collected a lot of books, patterns and tools a lot of which I purchased on ebay. I have a collection of about 40 different swivel knives. Long story but it covers about 50 years.........Lee
  14. No this is like a towing or logging chain each link would be about an inch long. This stamp is quite probably 50 plus years old. Thanks anyway. Lee Thanks I will give them a try. I may have to borrow the stamp from Bev and make an example to post. Later Lee
×
×
  • Create New...