Jump to content
Sign in to follow this  
whiteeugene

Tie Down Hardware

Recommended Posts

I’m making a tie down to match a head stall I made for a costumer and am trying to find the hardware the part that the strap clips to. I have seen two different types one is a one piece looks like two rings at 90 degree offsets. The other used a ring and two pins. Can anyone recommend a place to get them?

Thanks Doug

Share this post


Link to post
Share on other sites

SLC has the triangle and ring type. it's their part number 4-100 and they call it a "Ring, Round, Tri". Weaver has the ring with a loop offset 90 degrees all in a single piece in 2 different sizes, their piece marks 498 Loop & Ring and 499 Loop & Ring. The 2 pin and ring type are pretty good looking but I haven't noticed the hardware for them before. You could probably use any ring and just figure out your own pins if you wanted to take the time to look over them and figure them out.

Good luck, Josh

Share this post


Link to post
Share on other sites

SLC has the triangle and ring type. it's their part number 4-100 and they call it a "Ring, Round, Tri". Weaver has the ring with a loop offset 90 degrees all in a single piece in 2 different sizes, their piece marks 498 Loop & Ring and 499 Loop & Ring. The 2 pin and ring type are pretty good looking but I haven't noticed the hardware for them before. You could probably use any ring and just figure out your own pins if you wanted to take the time to look over them and figure them out.

Good luck, Josh

Looks like SLC has halter bolts.

Share this post


Link to post
Share on other sites

You bet Doug, good luck on it. If you go with the halter bolt/ring set up make sure to post some pictures!

Best regards, Josh

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...